Investigating lowering Options

[Mangozac]

Hi guys,

Following on from my thread here I've been investigating lowering the Celi. I've done a bunch of searching and reading but still am a bit confused. I'll be doing all the installation myself, just need to get the parts.

So I'd prefer to get some Tein S-techs but just for kicks I went and saw a suspension place across from my work to see what they reckon. Note that they generally seem to raise more than lower - most of their clientele is 4WD owners looking to jack their cars up.
Anyway he quoted me AU$154 (about $120 US) a pair for a set of King Springs which he said would lower about 34mm. Fair enough.
I then asked about some struts. He recommended some KYB performance struts (dunno which ones) and they were about $250 each! So that's like $1000 just on the struts! For that kind of price it would be worth getting coilovers!

So I have a couple of questions:

1. How much should a set of Tein S-Techs cost me?
2. The Celi is 8 1/2 years old - is it really necessary that I replace the struts also when I lower?
3. I can't really afford more than about $500-600 on the project so if I can't do it properly for that price I won't bother at all.

The listed Tein dealer around here is Maroochy Car Sound, who I don't believe is the cheapest place to buy stuff I'll give them a call today and check it out....

Thanks,

Zac

[an02]

it all depends on the height which you are dropping it to .. if your going to a maximum of 2 inches , i say it'll be fine ..

i had 2 inch pedders springs on for about a year or so , and they've never done me wrong , this was all done with the stock struts and what not .. plus my car is a 95' model ..

anything lower ?! i'd suggest coilovers !!

hope that helps

[DaveQB]

it all depends on the height which you are dropping it to .. if your going to a maximum of 2 inches , i say it'll be fine ..

i had 2 inch pedders springs on for about a year or so , and they've never done me wrong , this was all done with the stock struts and what not .. plus my car is a 95' model ..

anything lower ?! i'd suggest coilovers !!

hope that helps

I'd like to drop mine just a bit, 1.5-2 inches sounds good to me. Where do I begin ?
Should I start a new thread ?

I am thinking Mida's could do the actually lowering, would they supply the parts needed ?

As you can tell, I have no idea and am just guessing as a way to get this done.

Thanks