6G Celicas Forums

Welcome Guest ( Log In | Register )

> Driver's-side interior door panel, problem
post Feb 27, 2008 - 2:51 PM
+Quote Post
Kasper



Enthusiast
*
Joined Jul 1, '06
From Oregon
Currently Offline

Reputation: 0 (0%)




Alright so I was removing my door panels the other day to swap out the stock speakers with aftermarket ones. I started with the passengers side, and didn't have a problem. So i un-screwed all the same bolts off the drivers side as i did the passengers side, and the panel won't budge. It feels like it's stuck in the middle or something. Am I missing a bolt? Or is there something else? I pulled on it til I thought it was gonna break, so I gave up, and am now turning to all of you for help since I can't figure it out kindasad.gif


--------------------
- Be careful when playing leapfrog with a Unicorn -
 
Start new topic
Replies
post Feb 27, 2008 - 8:20 PM
+Quote Post
Kasper



Enthusiast
*
Joined Jul 1, '06
From Oregon
Currently Offline

Reputation: 0 (0%)




QUOTE(Rymaster @ Feb 27, 2008 - 6:48 PM) [snapback]646712[/snapback]

hey i noticed that the link posted for removing the door panel is missing one screw

it's right in the middle by the lower part of the handle on the door
you really have to bend down to see it
IPB Image

sorry for the crappy pic, just took it with my cell phone and its dark out

hope that helps you, smile.gif

Hmm, that might be what the problem is. That's about the area that it felt stuck, so maybe that screw isn't on the passenger side so I assumed it wasn't on the drivers side? I'll try to do it all tomorrow again.


--------------------
- Be careful when playing leapfrog with a Unicorn -

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: September 19th, 2025 - 1:03 AM