The new 5sfte, UPDATE: engine has low compression... Options

[6strngs]

well, after tearing the car down basically and replacing a lot of things. coming inches from giving up, and then changing my mind, and problem after problem, I've got another problem. My turbo blew. Some say it was under-fed oil, others say it was over-fed. In any case, it doesn't work. Well, this is the second turbo to blow on this car... the first one had problems from day one, but was used with an oil restrictor the entire time it was on the car... it lasted not even a week. the second one lasted about 2 months, and blew on the first hard run that I did after installing the restrictor. I'm not saying that it caused it, though it does really look like that, but everyone else on this website is using a restrictor without problems and swears that they are necessary, so I will still be using one on my new turbo. which brings me to that, I'm getting a new turbo. This time, a Garrett T3/T4 hybrid. 46 trim, .63 A/R. should be good for a couple more horsies anyway here's a list of some parts that'll be going on hopefully next week:

Garrett T3/T4 turbo, 46 trim .63 A/R
Tial 38mm wastegate, .7 BAR spring (10.15 PSI)
Ebay CT-26 to T3 manifold adapter
Custom 3" downpipe
Custom 3" Aluminum intake (thanks to CaliJeff)
Greddy oil catch can (again, thanks to Jeff)
Battery relocation

all the flanges, gaskets, and oil lines will likely be coming from ATPturbo.com who are located about 30 miles west of me anyway, I'm going to try to take a bunch of pictures and document this as best as I can. I'm going to be trying to do this without removing the A/C like I believe Shannon did. so, it's gonna be a challenge. but I'll figure it out one way or another. Anyway, here's some pictures of what I have so far, the rest should come in next week:

CT26 to T3 adaptor:


Intake:


Catch can:


more to come soon.

This post has been edited by 6strngs: Apr 15, 2008 - 10:58 PM

[6strngs]

well, it's still the same size turbo, just a smaller compressor housing. I worked it out with him and I'm mailing out the .70 A/R compressor housing out tomorrow and he said he'll mail out the .50 A/R compressor housing as soon as I send him the tracking number. so, should only be a couple more weeks. The new housing has a 90 degree bend for the outlet... which might just be a good thing

still haven't heard from the guy about the wastegate...

but I still bought another CT-26 that I'm gonna put in tomorrow so I can have a working turbo while I wait for this other one. for now, here's some pictures.

Here's a couple of the engine bay as it stands, with the new intake and the catch can, and relocated battery.



my friends were eating some alphabet cookies and they made this while I was inside:


and my favorite pic of all

[bccentaur3]

and my favorite pic of all

Jeez and I thought the ct26 was a big turbo.