 Body Repair, Hit N Run.... :/ |
 Mar 1, 2008 - 4:46 PM
|
 
|
 Enthusiast  Joined Jan 25, '06 From MN Currently Offline Reputation: 19 (100%)  |
Well a couple of weeks ago I was involved in a hit-n-run at the mall, waited 3 weeks now to see if they caught the person that ran into my car so far no luck....took it to ABRA the other day they wanted 1500+ to get it repaired I was like....I'll pass. What do you guys think I never done auto body before but would rather learn and use the rest of the money to upgrade my suspension. You guys think it would be easy to get this patched up ?? I don't even know where to start.
 I just need a list of the supplies I need to get this fixed up any help or tip is appreciated thanks.  As you can see the wheel arch is pushed in too....   The dent was bigger but I managed to pop the big dent in the middle out.   I know I gotta wash those damn salt off my car. 
-------------------- "To Protect And To Serve The Wealthy" -POLICE
|
 |
Replies
|
Mar 4, 2008 - 3:55 PM
|
|
 Enthusiast Joined Jan 18, '08 From Houston Currently Offline Reputation: 7 (100%) |
^Feen has a point.
heating it will alow it to bend easyer, but at a price. it's also possible for it to stretch out at the pressure points when doing that. If you had a mold then this wouldnt' be such a bad idea, but seeing as your not going to "take off" your quarter panel anytime soon~ Also, filler don't stick to paint, and fiberglass will not stay long with metal or paint. -------------------- QUOTE (presure2 @ Nov 6, 2010 - 6:16 AM) Via FB: fcuking awsome!!! D-man FTW! QUOTE (DEATH @ Nov 11, 2008 - 5:40 PM)  Damn D-Man - most impressive. QUOTE (99GT @ Nov 14, 2008 - 4:04 PM) D-Man's post should be a sticky QUOTE (samir0189 @ Nov 4, 2008 - 10:50 AM) LOL, oh boy, you can always count on D-Man for ridiculously hilarious posts. |
|
Mar 4, 2008 - 4:08 PM
|
|
 Enthusiast Joined Jan 31, '08 From Canada Currently Offline Reputation: 0 (0%) |
QUOTE(D-Man @ Mar 4, 2008 - 3:55 PM) [snapback]649140[/snapback] ...and fiberglass will not stay long with metal or paint. What?!? lol fibreglass is nearly the same effect is applied to paint... but tis fine on metal, it just needs good grooves. --------------------  FEEN |
|
Mar 4, 2008 - 4:11 PM
|
|
|
Enthusiast Joined Jan 18, '08 From Houston Currently Offline Reputation: 7 (100%) |
QUOTE(speedfeen @ Mar 4, 2008 - 5:08 PM) [snapback]649150[/snapback] QUOTE(D-Man @ Mar 4, 2008 - 3:55 PM) [snapback]649140[/snapback] ...and fiberglass will not stay long with metal or paint. What?!? lol fibreglass is nearly the same effect is applied to paint... but tis fine on metal, it just needs good grooves. not long term; it's bond with plastic for years and years, but if on paint, it will only hold up to the strenth of the paint itself, pls adds weight and a "handle" action. It'll hold, yes, but not as well, not for a *long* time. The "correct" thing to do is to sand it down to metal, prime, glass, sand, fill, prime, paint, clear, buff. *EDIT* not that everyone does this, including body shops; but it is the "correct" way for "optimal" results. You dont "HAVE" to do any of it; hell you can go hit it with the torch if ya wanna and burn the paint off and prime it, lol. What you do is up to you, but its what you do that determines how it will turn out, and hold up. This post has been edited by D-Man: Mar 4, 2008 - 4:16 PM -------------------- QUOTE (presure2 @ Nov 6, 2010 - 6:16 AM) Via FB: fcuking awsome!!! D-man FTW! QUOTE (DEATH @ Nov 11, 2008 - 5:40 PM) Damn D-Man - most impressive. QUOTE (99GT @ Nov 14, 2008 - 4:04 PM) D-Man's post should be a sticky QUOTE (samir0189 @ Nov 4, 2008 - 10:50 AM) LOL, oh boy, you can always count on D-Man for ridiculously hilarious posts. |
Posts in this topic
Remy Body Repair Mar 1, 2008 - 4:46 PM
bccentaur3 That is worst than how you explained it. Don't... Mar 1, 2008 - 6:23 PM Remy QUOTE(bccentaur3 @ Mar 1, 2008 - 6:2... Mar 1, 2008 - 7:17 PM bccentaur3 dude it worked for me. Depends on how big the dent... Mar 1, 2008 - 10:03 PM Remy The circled area is pretty much creased or pushed ... Mar 1, 2008 - 10:50 PM bccentaur3 OKay, I can see the crease much better with the ci... Mar 1, 2008 - 11:38 PM Remy One of my friend said that filler and sanding woul... Mar 2, 2008 - 12:59 PM speedfeen honestly
if its more than 1/4 of an inch deep an... Mar 4, 2008 - 12:09 PM axelrduvirage remy, that looks deep. you can't just fill an... Mar 4, 2008 - 12:41 PM _mikeE You're going to have to take out the entire pa... Mar 4, 2008 - 12:54 PM
speedfeen QUOTE(_mikeE @ Mar 4, 2008 - 12:54 P... Mar 4, 2008 - 3:27 PM speedfeen QUOTE(D-Man @ Mar 4, 2008 - 4:1... Mar 4, 2008 - 4:16 PM D-Man i'd set it on fresh prime, or adhesive, not di... Mar 4, 2008 - 4:18 PM 99GT Forget about it. Work on suspensions and performa... Mar 4, 2008 - 4:58 PM D-Man QUOTE(99GT @ Mar 4, 2008 - 5:58 PM) ... Mar 4, 2008 - 5:30 PM Remy ^^^ lol you two are funny you guys said the same t... Mar 4, 2008 - 6:40 PM D-Man QUOTE(Remy @ Mar 4, 2008 - 7:40 PM) ... Mar 4, 2008 - 9:35 PM 99GT Dude if you need a hand. I should be open on the w... Mar 4, 2008 - 9:18 PM bhawk94 That's weird because I was hit in almost the s... Mar 4, 2008 - 9:35 PM speedfeen QUOTE(Remy @ Mar 4, 2008 - 6:40 PM) ... Mar 5, 2008 - 8:00 AM Remy I though slide hammer was a body hammer ?? I'm... Mar 5, 2008 - 11:38 AM speedfeen QUOTE(Remy @ Mar 5, 2008 - 11:38 AM)... Mar 5, 2008 - 12:19 PM D-Man QUOTE(Remy @ Mar 5, 2008 - 12:38 PM)... Mar 5, 2008 - 12:42 PM bccentaur3 You can hit me up too. I'm free on the weekend... Mar 5, 2008 - 12:30 PM Remy QUOTE(speedfeen @ Mar 5, 2008 - 12:1... Mar 5, 2008 - 4:39 PM D-Man no prob~
Now you owe me 1) Manuel transmission fo... Mar 5, 2008 - 4:52 PM Remy QUOTE(D-Man @ Mar 5, 2008 - 4:5... Mar 5, 2008 - 5:03 PM D-Man QUOTE(Remy @ Mar 5, 2008 - 6:03 PM) ... Mar 5, 2008 - 5:30 PM Remy QUOTE(D-Man @ Mar 5, 2008 - 5:3... Mar 5, 2008 - 6:45 PM D-Man QUOTE(Remy @ Mar 5, 2008 - 7:45 PM) ... Mar 5, 2008 - 9:59 PM bccentaur3 Dude, trust me. When its summer time, you're g... Mar 6, 2008 - 12:00 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: October 26th, 2025 - 1:43 PM |