 car radio not working |
 Mar 11, 2008 - 6:05 PM
|
 
|
|
Enthusiast  Joined Apr 29, '03 From lynn,ma Currently Offline Reputation: 0 (0%)  |
trying to turn it on and all it does is flash and than shut off, did the fuse get burnt or something or is there something i am not doing right.
i tried to install a new head unit but it doesn't power on, so i plug in the factory and it doesn't turn on either. any info would be helpful thanks |
 |
Replies
|
Mar 12, 2008 - 8:54 PM
|
|
 Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
ok, what i do is this. Open the hood, i connect the yellow and red wire to the positve pole, and ground to negative of the aftermarket.
get a speaker. And try each channel individually, this will help you test your aftermarket. I know this is getho style but it bypasse all wiring and fuses. Unles you have a bench supply with 12 volts of course... if your radio still not working this way, then its possibly dead... -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Mar 13, 2008 - 3:08 AM
|
|
|
Enthusiast Joined Apr 29, '03 From lynn,ma Currently Offline Reputation: 0 (0%) |
ok so i want to skip the amp. is there another harness i can buy or do i just hotwire them? might as well ask before trying anything else
|
|
Mar 13, 2008 - 3:09 AM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
QUOTE(kamax @ Mar 13, 2008 - 4:08 AM) [snapback]653101[/snapback] ok so i want to skip the amp. is there another harness i can buy or do i just hotwire them? might as well ask before trying anything else  edit Found my pic: The little thing im touching, is part of the main harness. The plugs that it ends with, conects with the harness that exits the amps. These plugs are standard in all toyotas from specific years. So all you need is to look up in ebay this.(below) Instead of hotwire, buy a harness that is plug, and play. It will save you headaches.. http://cgi.ebay.com/87-Toyota-Camry-Celica...1QQcmdZViewItem This post has been edited by njccmd2002: Mar 13, 2008 - 3:16 AM -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
Posts in this topic
kamax car radio not working Mar 11, 2008 - 6:05 PM
GriffGirl check your fuses would be the first thing Mar 11, 2008 - 6:12 PM D-Man Check your wiring, it sounds like something may be... Mar 11, 2008 - 6:41 PM
kamax QUOTE(D-Man @ Mar 11, 2008 - 4... Mar 11, 2008 - 9:23 PM azian_advanced you probably blew your stock amp... same thing hap... Mar 11, 2008 - 9:45 PM Batman722 QUOTE(GriffGirl @ Mar 11, 2008 - 7:1... Mar 11, 2008 - 9:58 PM njccmd2002 QUOTE(Batman722 @ Mar 11, 2008 - 10... Mar 11, 2008 - 10:14 PM kamax QUOTE(njccmd2002 @ Mar 11, 2008 - 8... Mar 12, 2008 - 4:31 PM GriffGirl I blew a fuse to my (aftermarket) radio about a mo... Mar 12, 2008 - 12:34 PM D-Man wait, did you wire your head unit thru your amp th... Mar 12, 2008 - 4:44 PM D-Man Well done njccmd2002. Well done.
Kamax, this is w... Mar 13, 2008 - 9:48 AM kamax QUOTE(D-Man @ Mar 13, 2008 - 7... Mar 13, 2008 - 3:44 PM D-Man QUOTE(kamax @ Mar 13, 2008 - 4:44 PM... Mar 13, 2008 - 3:48 PM azian_advanced i'm glad... btw kamax, do you have an 8 speak... Mar 13, 2008 - 7:22 PM kamax well after struggling with trying to find the orig... Mar 14, 2008 - 10:01 AM D-Man QUOTE(kamax @ Mar 14, 2008 - 11:01 A... Mar 14, 2008 - 10:04 AM azian_advanced if you need to remove the stock amp, you'll ne... Mar 14, 2008 - 11:42 AM D-Man Yeah, and that's a pain in the hassle. lol.
... Mar 14, 2008 - 1:11 PM DEATH you don't have to take the center dash sides o... Mar 14, 2008 - 1:19 PM D-Man eh- it's unplugged, so i'll just let it si... Mar 14, 2008 - 1:32 PM DEATH Yeah I just needed it out of the way so I could ge... Mar 14, 2008 - 1:42 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: August 22nd, 2025 - 1:52 PM |