![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Apr 19, '07 From Dayton, Ohio Currently Offline Reputation: 7 (100%) ![]() |
k, first off please dont get pissed that im asking help about a saturn ion 07 4 door. its my girls car and she had abit too much to drink lastnight... im helping clean it out, but the rear door is nothing like my celicas? i was hoping someone with info/ possibly pictures, could give me a few tips to take this rear door apart.
thanks for any help* -------------------- |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jan 18, '08 From Houston Currently Offline Reputation: 7 (100%) ![]() |
Okay, Yes i'm with Valo666, this should be off topic.
Next, you wanna take the door apart on a saturn, dont expect a bunch of celica owners to have pics. No offense, but common now... As for taking the door apart, All doors work the same. There is a panel that you need to take off first. This sounds like the only step you want to take. Look for screws that seem to hold the panel on. Take those off. After they are all off, the panel should come off, if it dont, look for more. If you cant find any more, look for plastic screw covers, remove those and the screws. If it still dont come off and it's holding on the edges, than Get a flat head screw driver and a wash-rag, put the rag over the flathead, then wedge it between the panel and the door frame and apply pressure till the Clip'n Clips pop out. Make sure you dont rip any wires, remove harness's at the harness joints. (where 2 harness' meet) dont puncture any speakers. Good luck, but we cant give you pics. You pretty much gotta figure it out on your own. Dont worry, your not the first pioneer. We were all pioneers at one time! GL!! ![]() -------------------- QUOTE (presure2 @ Nov 6, 2010 - 6:16 AM) Via FB: fcuking awsome!!! D-man FTW! Damn D-Man - most impressive. D-Man's post should be a sticky LOL, oh boy, you can always count on D-Man for ridiculously hilarious posts. |
![]() ![]() |
Lo-Fi Version | Time is now: July 27th, 2025 - 1:19 PM |