Mar 24, 2008 - 5:26 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 29, '05 From So-Cal Currently Offline Reputation: 12 (100%) |
I know that any tranny in the "S" family of toyota engine can be fitted and are bolt on, but has anyone done there research on any other types of replaceable tranny(s) out there? and for our 5SFE or 3SGTE or 3SGE family...is our tranny a front transverse, inline, or transaxle longitudinal? I couldn't recover any of this from searching the forum...I want to learn more about the different aftermarket parts, so that once i do my swap, i can just replace everything to get pass the 400+ hp and not worry about the parts breaking down on me. I was looking into the tranny that i have kept looking at over a year now, which is the Getrag tranny, gearboxes, and compartment...If anyone can post up the link to tranny information about our 6gc, or have info to share about the tranny and compartments and gear box....i would greatly appreciate it...sorry to have made a thread on this if there were an older existing thread in regards to the tranny.
![]() KEY BENEFITS * Very short and compact 3-shaft design * High torque capacity on all gears * Wide ratio spread enables low fuel consumption * All Wheel Drive application available APPLICATIONS * Front Wheel driven and All Wheel driven vehicles in compact, medium size and upper medium size cars KEY FEATURES Max. Torque Capacity 350 Nm Weight (dry) 49 kg Installation length 353 mm Input Shaft - Differential 196,94 mm Synchronization 1st and 2nd gear triple cone 3rd and 4th gear dual cone 5th gear single cone Reverse gear single cone Gear Spread Ratio 5,192 Max. Gross Vehicle Mass/Gross Trailer Mass 2160 kg/3960 kg Shifter System cable shift Miscellaneous 3-shaft design GETRAG Tranny |
![]() |
Mar 25, 2008 - 10:22 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 29, '05 From So-Cal Currently Offline Reputation: 12 (100%) |
i guess no? i try calling them but went straight to their voice...
|
chacha What are the other options for a tranny for the 3SGTE? Mar 24, 2008 - 5:26 PM
jazzcornet stick with the E153 tranny. it's been proven t... Mar 29, 2008 - 9:17 PM
chacha yeah...i was just hoping for a smaller tranny with... Apr 1, 2008 - 6:15 PM
Cuts_the_Pilot 350nm no where near enough.
im putting out 500 nm ... Apr 1, 2008 - 8:38 PM
chacha thanks...for the clear up, i don't know much a... Apr 2, 2008 - 8:25 PM![]() ![]() |
| Lo-Fi Version | Time is now: January 15th, 2026 - 1:49 PM |