Mar 24, 2008 - 3:55 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 19, '07 From tx Currently Offline Reputation: 22 (100%) |
As the topic says my car wants to die on me. Actually before I get to the current problem I'll detail my 4 day weekend/Gremlin attacks:
1. [Thurs - day one of a promising 4 day weekend So I got invited to the TX2K8 [Annual North American Supra Meet] dinner and meet at Frank-N-Steins and went there: 2. [Friday night] Blew my turbo coupling [the first one attached to the compressor outlet] into tiny little shreds so had to limp home with no boost [not a fun way to spend a 45min drive with a grouchy GF, two sleeping teens in the back seat and a pissed off Mega Chihuahua on the back hatch cover at 2:30 in the morning]. Got home and fixed that but discovered the coolant return line from the Turbo was spraying coolant [evidenced by the pancakes smell of burning off Toyota For Life Coolant]. Put a clamp on that and refilled the coolant with another $10 worth of coolant. So I need to take my GF to a Fetish Ball [Not like I wanted to go or anything 3. [Sat Night] So I get all the Gremlins slayed and start the car with the hood open, observing all the fixed problems and the gauges until the car warms up. So I back out of the garage and turn the lights on and Bam! - the car trys to die and generally runs like sh*t. Turn off the lights and idle returns to normal. Hit the brakes and the idle again drops and the engine runs like sh*t. And here's the real slap to the face - roll down the window and the car wants to die! So the GF is pissed again cause she's been looking forward to this for 3 months. Luckily for her Havok and his lady are going anyway so they offer to drive us and drop us off later [Thanks again Bro!] and we go to the FB and altho I usually enjoy myself immensly at these things my mind is with the car back in the garage and I ate something bad and felt like puking [almost did several times actually - Dry heaving FTL ]4. [Sun] Woke up at 5PM with absolutely no energy and no drive to work on the car So after that long dissertation I'd like to thank this guy for the very interesting weekend: ![]() Fcukin asshats always playing games under my hood Now to my questions [Alltracman - help me out buddy]: 1. WTF is up with that code 42 and what should I check to get it diagnosed and fixed up and hopefully finally have a working speedo? 2. WTF is up with that electronics gremlin that makes any powered accessory cause the idle to drop and almost die? My first thought is bad ground connections - sound plausible? Ideas, theories or [hopefully] past experience? 3. Why can't I just go a whole week without something fcuking up on this car? Damn I miss my trustworthy, never fails to start and run like God designed it 5S. Now this my friends and potential swap owners is why you have no business owning a car that you yourself did not swap [or like in my case - have already swapped a Celica in the past and felt like skipping the initial headache portion of the process]. If you don't know the 3S-GTE and all you've ever owned was a 5S or 7A - don't even consider having someone else swap your car - the experience and famliarity with the engine you will gain by swapping it yourself or with some friends is priceless. Seriously. This post has been edited by DEATH: Jan 31, 2017 - 8:23 PM -------------------- ![]() ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI] PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYO SUSP: Tein/Bilstein/SusTech/ INT: SS-III SEATS/Toyota Hyper Sports EXT: WRC/TRD/404 Its a safety feature so that people like you don't end up killing themselves or everyone around them. Slow down Paul Walker. 6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url] |
![]() |
Mar 29, 2008 - 9:32 AM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 19, '07 From tx Currently Offline Reputation: 22 (100%) |
Shes getting her first oil change today: Mobile1 Fully Synthetic with TRD filter [got a deal on 2 for $10 so why not?]. I've spent most of the morning tightening the many loose screws I found underneath.
Question: Since I did the A/C delete is there any reason why I can't remove the heat exchanger between the Radiator and the FMIC [used to cool other sh*t etc]? Reason being I am going to install my Koyo Radiator and it has the big Koyo Logo on the front that you can't see cause of the heat exchanger, plus it's just dead weight if all it does is get rid of a/c heat and I have no a/c. I know it's probably a waste of time to most people but I like to see that kind of stuff - especially on a $350 part I hope to start the Speedo thing tomorrow morning. This post has been edited by DEATH: Mar 29, 2008 - 9:33 AM -------------------- ![]() ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI] PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYO SUSP: Tein/Bilstein/SusTech/ INT: SS-III SEATS/Toyota Hyper Sports EXT: WRC/TRD/404 Its a safety feature so that people like you don't end up killing themselves or everyone around them. Slow down Paul Walker. 6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url] |
DEATH DEATH's GT2 Progress [Updated 01-24-13] Mar 24, 2008 - 3:55 PM
presure2 i would say the power problem is one of 2 things.
... Mar 24, 2008 - 4:03 PM
DEATH Yeah I bought Chanh's old car but as I said I ... Mar 24, 2008 - 4:11 PM
presure2 QUOTE(DEATH @ Mar 24, 2008 - 5:11 PM... Mar 24, 2008 - 4:23 PM
DEATH Thanks so much Pressure. I can't get anything ... Mar 24, 2008 - 4:40 PM
lagos QUOTE(DEATH @ Mar 24, 2008 - 5:40 PM... Mar 24, 2008 - 6:42 PM
lagos QUOTENow this my friends and potential swap owners... Mar 24, 2008 - 6:54 PM
politicsareevil Matt..... end this all once and for all..... send ... Mar 24, 2008 - 6:58 PM
alltracman78 Speedo first.
Assuming the connection and wiring ... Mar 24, 2008 - 8:31 PM
DEATH You fcukin rock. I love this site
Got the parts ... Mar 25, 2008 - 9:45 PM
Havok1997GT Luckily for her Havok and his lady are going anywa... Mar 24, 2008 - 9:45 PM
DEATH Thanks Pressure, Lagos and Alltracman.
1. Celicate... Mar 25, 2008 - 6:31 AM
presure2 QUOTE(DEATH @ Mar 25, 2008 - 7:31 AM... Mar 25, 2008 - 3:57 PM
6strngs get a multimeter and put the positive end on the n... Mar 25, 2008 - 9:15 AM
DEATH Will do. Thanks alot.
Anything else guys? I'm ... Mar 25, 2008 - 9:21 AM
phattyduck The electrical load issue might also be the ... Mar 25, 2008 - 1:34 PM
DEATH Yeah - that's what I planned to do [since I ca... Mar 25, 2008 - 4:06 PM
GriffGirl Check your email, it's on its way.
I'll b... Mar 25, 2008 - 6:59 PM
DEATH nvm
double post Mar 25, 2008 - 9:40 PM
Havok1997GT good luck man. Hope everything works. (Knock on ... Mar 25, 2008 - 10:04 PM
lagos Dont bother testing the speed sensor. Im telling y... Mar 25, 2008 - 10:25 PM
DEATH You have no idea what a difference that damn groun... Mar 26, 2008 - 1:26 PM
DEATH OK Speedo issue now. I got these diagrams [they sa... Mar 26, 2008 - 2:15 PM
alltracman78 See the speedo sensor in the diagram?
3 Wires comi... Mar 26, 2008 - 3:09 PM
DEATH You're the man - I knew one of you guys could ... Mar 26, 2008 - 3:16 PM
alltracman78 The speed sensor has 1 connector.
I doubt the wire... Mar 26, 2008 - 3:30 PM
alltracman78 If you can't understand what the diagrams mean... Mar 26, 2008 - 3:36 PM
DEATH QUOTE(alltracman78 @ Mar 26, 2008 - 3... Mar 26, 2008 - 3:56 PM
DEATH Ah! I think I understand now. That coupled wit... Mar 26, 2008 - 3:37 PM
alltracman78 The easiest way is to find the wires in the 3S har... Mar 26, 2008 - 5:14 PM
lagos Bingo. You actually supposed to have a factory gro... Mar 26, 2008 - 9:47 PM
DEATH QUOTE(lagos @ Mar 26, 2008 - 9:47 PM... Mar 27, 2008 - 8:52 AM

D-Man QUOTE(DEATH @ Mar 27, 2008 - 9:52 AM... Mar 27, 2008 - 8:58 AM
phattyduck QUOTE(lagos @ Mar 26, 2008 - 7:47 PM... Mar 27, 2008 - 2:40 PM
DEATH QUOTE(phattyduck @ Mar 27, 2008 - 2... Mar 27, 2008 - 2:52 PM
6strngs definately zip tie that wire to the AC lines or so... Mar 27, 2008 - 1:11 AM
DEATH 95celGT - Yeah no problem. I would feel the same w... Mar 27, 2008 - 7:50 AM
95celgt I had installed a ground wire in the same place bu... Mar 27, 2008 - 2:23 AM
DEATH Watching my A/F this morning I think I need to cha... Mar 27, 2008 - 7:41 AM
D-Man Yeah, i can vouch for that. Death dont like doing ... Mar 27, 2008 - 8:13 AM
DEATH QUOTE(D-Man @ Mar 27, 2008 - 8... Mar 27, 2008 - 8:20 AM
95celgt I have a complete steering colum with clock spring... Mar 27, 2008 - 2:06 PM
D-Man okay, i got your back on the horn. I cant find the... Mar 27, 2008 - 2:19 PM
DEATH QUOTE(95celgt @ Mar 27, 2008 - 2:06 ... Mar 27, 2008 - 2:31 PM
D-Man yeah, when you feel safe enough to DRIVE the car (... Mar 27, 2008 - 2:38 PM
lagos I guess your right, I always remembered it bolting... Mar 27, 2008 - 2:57 PM
DEATH QUOTE(lagos @ Mar 27, 2008 - 2:57 PM... Mar 27, 2008 - 3:14 PM
lagos That bar is the wrong length/size for our cars, so... Mar 27, 2008 - 4:21 PM
DEATH QUOTE(lagos @ Mar 27, 2008 - 4:21 PM... Mar 27, 2008 - 4:39 PM
Chanh55 Sounds like she's coming along nicely. Mar 27, 2008 - 4:43 PM
alltracman78 You sort out the wiring yet?
QUOTE(DEATH @ M... Mar 27, 2008 - 9:57 PM
lagos < - 0wned.
All the while I thought it bolted t... Mar 27, 2008 - 10:17 PM
lagos The ecu has 3 harness plugs. Remove the 3rd ecu p... Mar 27, 2008 - 10:57 PM
95celgt to be honest i dont know jack about how the horn w... Mar 28, 2008 - 1:22 AM
DEATH QUOTE(lagos @ Mar 27, 2008 - 10:57 P... Mar 28, 2008 - 2:26 PM
presure2 QUOTE(DEATH @ Mar 29, 2008 - 10:32 A... Mar 29, 2008 - 12:05 PM
DEATH Sweet - thanks. Today I did the oil change and tri... Mar 29, 2008 - 5:33 PM
DEATH OK - Been a couple of months since I updated this.... Jun 18, 2008 - 7:36 AM
lagos QUOTE 1. The AEM Wideband reads between 14.5 to 15... Jun 18, 2008 - 9:33 AM
DEATH Thanks Lagos - you've been a huge help so far.... Jun 18, 2008 - 9:55 AM
lagos Tvsv (factory boost solenoid)
Your supposed to dis... Jun 18, 2008 - 10:03 AM
DEATH You mean thats where the other line runs to and th... Jun 18, 2008 - 10:21 AM
lagos Your map sensor vac line goes to the intake manifo... Jun 18, 2008 - 11:27 AM
DEATH Gotcha thanks. One question tho - where is the TVS... Jun 18, 2008 - 11:32 AM
95celgt TVSV is on the vaccum acessory rail at the bottom ... Jun 18, 2008 - 11:55 AM
DEATH nvm Jun 18, 2008 - 1:18 PM
95celgt yeayea, i meant my FC3S RX7
well atleast i told... Jun 18, 2008 - 1:21 PM
darthripley TVSV limits your boost in 1st & 2nd gear to 5p... Jun 30, 2008 - 3:17 PM
DEATH Wednesday - My computer crashes - Hard. $2000... Jul 3, 2008 - 6:16 PM
DEATH QUOTE (DEATH @ Jul 3, 2008 - 7:16 PM... Jul 24, 2008 - 8:32 AM
DEATH Cont.
The Job:
Replace all heater and coolant hos... Jul 7, 2008 - 4:52 PM
D-Man Did you ever go to the Dyno Event at Turbochargers... Jul 17, 2008 - 8:55 AM
DEATH Nope - My spot is still on reserve tho. Waiting fo... Jul 17, 2008 - 10:01 AM
D-Man oh, you gotta buy that new boost gauge before you ... Jul 17, 2008 - 10:13 AM
DEATH No - Not a new Boost gauge [That's for you ret... Jul 17, 2008 - 10:30 AM
D-Man QUOTE (DEATH @ Jul 17, 2008 - 10:30 ... Jul 17, 2008 - 10:52 AM
DEATH Not necessarily. The stock ECU knows full well wha... Jul 22, 2008 - 11:47 AM
D-Man oh right, I forget the 3s you've got was made ... Jul 22, 2008 - 11:54 AM
darthripley ^ that's just at stock boost which is 8psi, un... Jul 22, 2008 - 2:29 PM
D-Man Nope, it was at stock. Just remember i'm runni... Jul 22, 2008 - 2:55 PM
DEATH You already have a rebuildable turbo so it's j... Jul 22, 2008 - 3:12 PM
D-Man No... What do i have to buy FROM you to FUND the c... Jul 22, 2008 - 3:55 PM
zero07 And you wanted us to leave you behind..........Dea... Jul 24, 2008 - 11:01 AM
DEATH QUOTE (zero07 @ Jul 24, 2008 - 11:01... Jul 24, 2008 - 11:20 AM
darthripley hopefully replacing the starter fixed the hot star... Jul 24, 2008 - 2:00 PM
D-Man QUOTE (darthripley @ Jul 24, 2008 - 2... Jul 24, 2008 - 2:20 PM
DEATH GT2 but "Muchos Garcias"
Ripley - It j... Jul 24, 2008 - 2:32 PM
Havok1997GT D-man, Im not going to be stock much longer (as s... Jul 24, 2008 - 5:45 PM
darthripley QUOTE (DEATH @ Jul 24, 2008 - 3:32 P... Jul 24, 2008 - 6:05 PM
DEATH You wanna know how I tracked mine down? I added a ... Jul 25, 2008 - 3:02 PM
darthripley that's a great way to find vac leaks. luckily ... Jul 25, 2008 - 6:21 PM
lubu QUOTE (darthripley @ Jul 26, 2008 - 7... Jul 26, 2008 - 12:54 AM
darthripley QUOTE (lubu @ Jul 26, 2008 - 1:54 AM... Jul 26, 2008 - 3:16 AM
lubu QUOTE (darthripley @ Jul 26, 2008 - 4... Jul 26, 2008 - 4:15 AM
DEATH Blingy chromy type stuff seemed to be the order of... Aug 11, 2008 - 3:29 PM
darthripley STB looks good!
the heat shield will turn gold... Aug 11, 2008 - 4:26 PM
DEATH QUOTE (darthripley @ Aug 11, 2008 - 5... Aug 11, 2008 - 4:28 PM
CelicaST_CALI can someone sum up this thread in a single post pl... Aug 11, 2008 - 4:49 PM
95celgt are those splitters i see??!?
i just fixed m... Aug 11, 2008 - 4:52 PM![]() ![]() |
| Lo-Fi Version | Time is now: October 25th, 2025 - 2:31 PM |