My supra project, input needed Options

[Muggs]

I would post this on supraforums, but they would just argue with each other and not give a straight answer, so I'll try here first.
I am planning on buying a 7mgte and trans locally, building it up, and dropping it into an older supra chassis (mk2, 82-85 is much lighter than a mk3) I would like this to be a street legal drag car, stripped out, drag radials, etc.
What power levels would get me in the 10 second range, and what turbo do I need to get there? I have been doing a lot of researching on supraforums, but I want your input, too. this site is better, anyway.
Thanks

[95st-celica]

if your looking to dip down into the 10's your gonna need to do internals...forged pistons, rods, cams, maybe even a stroker kit...larger turbo would be nice...look into holset...water injection to keep that block cool.....also i would build the bottom end up strong and run nitrous....i know a lot of people say its no good and it kills the motor a lot faster but i beg to differ....if its built correctly and you run it a little bit more rich then what they suggest you will be fine...i dont know if your looking to go 10's w/out spray or not but i know that a 200 shot would be nice and will help get you there...espically if your not going to be driving the car everyday. Just do your homework and build it right and you should be able to come out with a 10 second car....also dont cheap out on anything if you want it to last....quality gets you further then anyhting...keep us updated and let us know how you make out