![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Oct 10, '03 From Wichita, KS Currently Offline Reputation: 5 (100%) ![]() |
So what happened to the guy making the kits for the heater control lights. I need to do my clock and heater controls but don't want to just jump in not knowing what the heck I'm doing. I'd like to change them to blue to match the rest of the interior. Anyone know what type/size the lights are inside there. Oh yeah what type of bulbs are in the ignition key and cigarette lighter ring?
|
![]() |
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Apr 17, '03 From Rockland NY Currently Offline Reputation: 15 (100%) ![]() |
this is what i used to make my lights red
Wide Angle LEDs 1.7 volt - 20mA - 800mcd Resistors 470-Ohm - 1/2 Watt - 5% tolerance here is a pic of the packages ![]() Does anyone have any suggestions for other resistors that would make the leds even briter? Like those little led key chains ! I hope this info helps you guys out ! If you decide to do this mod be careful with the curcuit board and take ur time doing it. This took me three times and I'm still not done but I'm like 99% done with it. I wasnt careful with the board lol but now I am If you have any questions let me know defgeph This post has been edited by defgeph: Oct 15, 2003 - 12:45 AM -------------------- ![]() I will return one day. |
![]() ![]() |
Lo-Fi Version | Time is now: July 24th, 2025 - 1:18 PM |