![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Feb 8, '06 From Nova Scotia, Canada Currently Offline Reputation: 1 (100%) ![]() |
how much will a new set of TEIN S.Tech and KYB GR-2s drop after the break-in period? how long is the break-in period? it has been suggested that i have another alignment done after the break-in period. is this absolutely necessary or just precautionary?
thanks for the input. peace. This post has been edited by axelrduvirage: Mar 29, 2008 - 11:12 PM -------------------- ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Feb 16, '07 From BP, MN Currently Offline Reputation: 7 (100%) ![]() |
I have teins s-techs on oem.....works fine for me. For a good month or so people got me thinking that my 18in rims were too big for my suspension set-up and I believed them too because I could hear a poping noise, but in the end it turned out that one of my lug nut came off therefore making my wheel shake.
Mine are already settled and the drop is not bad.....yeah everyone is correct...about 1.5" drop in the front and 1" in the back. Whether oem or kyb.....really can't tell the difference for me...although better chance of not getting dead struts with kybs and may drop a little lower than oem. Alignment is always an issue when dropping your car....I need one this spring and as far as chamber yes it does come with it. I've only seen nissan 240s with negative offsets, but "us" fwd cars being dropped have the 38-40+ offset creating chamber. Anyone able to shine some info on how to adjust chamber as I know that kyb's and other cheap struts cannot alter chamber settings..... -------------------- ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: August 19th, 2025 - 6:45 PM |