![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Sep 2, '05 From delaware Currently Offline Reputation: 0 (0%) ![]() |
hi guys i a 5sfte with a ct-26 turbo and the turbo doesnt spool up at all from idle to max rpm it seems to be leaking oil on the compressor side and i have tried messing with the wastegate to see if it was stuck and it moves manualy and still no boost
![]() ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Feb 27, '07 From cape coral/ft myers florida Currently Offline Reputation: 7 (100%) ![]() |
QUOTE(1994toyotaracer @ Apr 6, 2008 - 4:55 PM) [snapback]661920[/snapback] when i take the air filter off the compressor wheel doesnt spin but i can fre-spin it by hand and i dont have any intercooler piping setup yet i know the seals are probally blown but i would think i would still get boost i can move the wastegate rod ok and i did turn the turbo housing a little for clearance issues do you think that may have something to do with it you have no intercooler piping in the car?!?!?! if thats true you wont build boost number one and number two thats not too smart to run the car like that QUOTE(1994toyotaracer @ Apr 6, 2008 - 5:38 PM) [snapback]661933[/snapback] is it possible to take the center section out of the turbine housing without removing it from the exhaust manifold to see if the wheels have damage no -------------------- ![]() BOOST GETS YOU LAID!!!! |
![]() ![]() |
Lo-Fi Version | Time is now: July 18th, 2025 - 3:17 PM |