 2 gen 3sgte coil wire, P/N's and differences? |
 Apr 6, 2008 - 4:37 PM
|
 
|
 Enthusiast  Joined Jan 13, '06 From UnderTheGround403 Currently Offline Reputation: 2 (100%)  |
I have a 93 3sgte (from an sw20) and therefore my ign wires have the clips (as opposed to the plunger style). I orered a tune up set from ats for 93 mr2 and the coil wire I got its a few inches too short compared to the one that is coming off the car. Is there a difference between the coil wire for a mr2 3sgte and a gt4 3sgte? I suspect that on an mr2 the ignitor is mounted closed to the dizzy and would require a shorter wire.
Is there a P/N for just the coil wire? Does anyone know what coil wire I would need to be using? Are the P/N different for 93 mr2 and 93 gt4? |
 |
Replies
|
Apr 6, 2008 - 10:22 PM
|
|
|
Enthusiast Joined Jan 17, '04 From Illinois Currently Offline Reputation: 0 (0%) |
That coil wire has never been replaced since the swap. I replaced all the ignition components on the car at some point but ran into the same problem you did with the coil wire. We tried the existing coil wire and the problems we were having went away with the installation of the other ignition components. I am not sure if the all-trac coil wire will work but its definitely worth a shot since its time to replace that piece - and I know Wannabe would not steer you wrong.
-------------------- QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback] i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this. |
Posts in this topic
6gsillyca 2 gen 3sgte coil wire Apr 6, 2008 - 4:37 PM
WannabeGT4 92-93 All-Trac Coil Wire:
19590-74150
$9.08 f... Apr 6, 2008 - 9:13 PM
6gsillyca QUOTE(jgreening @ Apr 6, 2008 - 9:22... Apr 6, 2008 - 11:42 PM WannabeGT4 Dunno about that. I use the Toyota EPC to find my ... Apr 7, 2008 - 9:10 AM lagos you normally just look up celica or mr2, and then ... Apr 7, 2008 - 2:05 PM 6gsillyca QUOTE(lagos @ Apr 7, 2008 - 1:05 PM)... Apr 8, 2008 - 11:59 AM 6gsillyca So I got my shipment from 1sttoyotaparts with my c... Apr 23, 2008 - 10:27 PM WannabeGT4 That's the wire I used and it fits fine with t... Apr 24, 2008 - 2:15 AM 6gsillyca Not sure how it is mounted from the factory, but m... Apr 24, 2008 - 2:18 AM WannabeGT4 QUOTE(6gsillyca @ Apr 24, 2008 - 2:1... Apr 24, 2008 - 2:21 AM 6gsillyca That is what I have read aswell, but was not able ... Apr 24, 2008 - 2:25 AM WannabeGT4 QUOTE(6gsillyca @ Apr 24, 2008 - 2:2... Apr 24, 2008 - 2:37 AM 6gsillyca Your dizzy looks like it is mounted closer to the ... Apr 24, 2008 - 11:19 AM DEATH From memory his stuff looks like MR2 parts whereas... Apr 24, 2008 - 11:27 AM 6gsillyca I would assume my parts are *mostly* mr2 parts, as... Apr 24, 2008 - 11:46 AM DEATH Damnit on second look both of yours look like MR2 ... Apr 24, 2008 - 11:50 AM WannabeGT4 My bracket is the stock 94-95 bracket for the igni... Apr 24, 2008 - 11:50 AM 6gsillyca Wannabe, your ignitor is also facing towards the f... Apr 24, 2008 - 1:47 PM WannabeGT4 QUOTE(6gsillyca @ Apr 24, 2008 - 1:4... Apr 24, 2008 - 1:52 PM 6gsillyca Is your dist. in the stock location? It looks like... Apr 24, 2008 - 1:56 PM WannabeGT4 QUOTE(6gsillyca @ Apr 24, 2008 - 1:5... Apr 24, 2008 - 1:59 PM 6gsillyca I thought it was the pic angle as well but your ig... Apr 24, 2008 - 2:12 PM WannabeGT4 QUOTE(6gsillyca @ Apr 24, 2008 - 2:1... Apr 24, 2008 - 2:48 PM DEATH Sorry it took me so long - I ended up having to wa... Apr 24, 2008 - 3:08 PM 6gsillyca Well I connected the dist end up and it looks like... Apr 24, 2008 - 3:19 PM DEATH Mine is the one for the '93 altrac - got it fr... Apr 24, 2008 - 3:27 PM 6gsillyca Well a 92-93 alltrac is the P/N Wannabe supplied m... Apr 24, 2008 - 3:53 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: September 20th, 2025 - 6:08 AM |