Apr 9, 2008 - 8:22 PM
|
|
![]() Enthusiast ![]() ![]() Joined Jan 13, '06 Currently Offline Reputation: 0 (0%) |
I know this should probably be in another section.
well my 7AFE in a corolla has been turbo'd since march of 2006 i believe. its my daily driver first i started at 5psi and worked my way to 12-15psi. haven't ran into any major problems with it. about 6 or so months ago i started getting smoke at the tail pipe after sitting at idle for a while. then as time progressed the problem got worse. Three months ago i did a compression test because blow by was pushing out excessive oil out the breather hose and found cyl 3 and 4 to be out of spec after putting a lil oil in it it shot up which meant rings were no good. The problem got worse, i had oil being pushed of nearly every seal that could leak. On 3-30-08 Sunday when i was in Houston it started smoking so badly it became undriveable, i left it there went back the next weekend 4-5-08 and stared tearing it down. Damage found - on cyl 3 in between the first and second rings the piston broke(i guess you can say the ring spacer) i was able to take a peace of it out with my hands in one of the pics you can see this area missing. on cyl 4 there are two cracks in the same section as cyl 3 piston. visual inspection of rings shows no damage. visual inspection of cyl walls shows no damage. (i know pic quality sucks ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ---------------------------------------------------------------- This post has been edited by southwest2118: Apr 26, 2008 - 8:02 PM |
![]() |
Apr 9, 2008 - 8:46 PM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
how many miles did it have ?
you were boosting up to 15psi on an auto ? -------------------- |
southwest2118 7AFE Budget Build!!! Apr 9, 2008 - 8:22 PM
southwest2118 as of right now 4-9-08 i'm waiting on the guy ... Apr 9, 2008 - 8:26 PM
jesterwr217 damn that sucks hopefully everything gets fixed an... Apr 9, 2008 - 8:35 PM
southwest2118 QUOTE(jesterwr217 @ Apr 9, 2008 - 7... Apr 9, 2008 - 8:40 PM
jesterwr217 QUOTE(southwest2118 @ Apr 9, 2008 - 9... Apr 9, 2008 - 8:54 PM
southwest2118 QUOTE(Batman722 @ Apr 9, 2008 - 7:46... Apr 9, 2008 - 9:08 PM
jesterwr217 haha yea 70 is waaaay too high Apr 9, 2008 - 9:14 PM
southwest2118 Well yesterday(4-25-08) i got my block and head ba... Apr 26, 2008 - 8:00 PM
jesterwr217 looks like the same 5 bolt pattern call em up and ... Apr 26, 2008 - 8:16 PM
xinginteg how much did the machine shop charge you for the w... Apr 26, 2008 - 8:51 PM
southwest2118 the rod caps have a "2" stamped on all f... Apr 26, 2008 - 8:58 PM
normality78 well bro, you got to get a decent camera May 1, 2008 - 3:14 AM
dans_st are you doing any work/modifications to the head? May 14, 2008 - 12:57 AM
stephen_lee damn bro i got mt block bored, honed, and cleaned ... May 14, 2008 - 1:14 AM
southwest2118 QUOTE (dans_st @ May 14, 2008 - 12:5... May 14, 2008 - 11:39 PM
jason hmm
any whats your eta on gettin this back on the... May 15, 2008 - 12:08 AM
southwest2118 QUOTE (jason @ May 15, 2008 - 12:08 ... May 17, 2008 - 1:32 AM![]() ![]() |
| Lo-Fi Version | Time is now: November 22nd, 2025 - 11:42 AM |