Heater Control Lights, What ever happened Options

[WannabeGT4]

So what happened to the guy making the kits for the heater control lights. I need to do my clock and heater controls but don't want to just jump in not knowing what the heck I'm doing. I'd like to change them to blue to match the rest of the interior. Anyone know what type/size the lights are inside there. Oh yeah what type of bulbs are in the ignition key and cigarette lighter ring?

[Defgeph]

The blue led I used is just like the red ones. I did not use a board to solder the resistors i just soldered the resistors to the positive terminal on the leds and ran new power wires for the the major lights . the indicator lights (show you where the air is blowing out ) little light on top of all the button i soldered to the factory board as well as the ac light no resistors were needed for these lights the board already had resistors on them. And the standard lights are little bulbs with green caps on them. and for my project it seems that the lower the ohm the briter it got so i cant really give you an answer but that what happend to me

I'll post the part numbers when i get home (tomorrow night) thursday night
and im guessing that its 12 volts inside the control box
but i used resistors only for the 3 lights that light up the whole control box everything else i soldered into the board with out resistors

well hope I answered all your questions
if any more post them and i'll help you guys out as much as i can and when i get a chance im gonna look for briter leds when i find them i'll put up some pics of the other side of the board
oh and i will be working in the clock next
will post when i figure that one out

sorry long post
defgeph

This post has been edited by defgeph: Oct 15, 2003 - 11:08 PM