 2 gen 3sgte coil wire, P/N's and differences? |
 Apr 6, 2008 - 4:37 PM
|
 
|
 Enthusiast  Joined Jan 13, '06 From UnderTheGround403 Currently Offline Reputation: 2 (100%)  |
I have a 93 3sgte (from an sw20) and therefore my ign wires have the clips (as opposed to the plunger style). I orered a tune up set from ats for 93 mr2 and the coil wire I got its a few inches too short compared to the one that is coming off the car. Is there a difference between the coil wire for a mr2 3sgte and a gt4 3sgte? I suspect that on an mr2 the ignitor is mounted closed to the dizzy and would require a shorter wire.
Is there a P/N for just the coil wire? Does anyone know what coil wire I would need to be using? Are the P/N different for 93 mr2 and 93 gt4? |
 |
Replies
|
Apr 24, 2008 - 2:18 AM
|
|
|
Enthusiast Joined Jan 13, '06 From UnderTheGround403 Currently Offline Reputation: 2 (100%) |
Not sure how it is mounted from the factory, but mine is on the firewall. Will try and get a pic of it tomorrow.
How long is your wire? The 1st one I got (with my mr2 kit) was 11". The 2nd one (from 1sttoyota, with the P/N you supplied) was also 11". You mentioned the alltrac wire is longer.. Not a very close-up shout, but you get the idea. Try not to pay too much attention to the chaos that is my engine bay... 
This post has been edited by 6gsillyca: Apr 24, 2008 - 2:22 AM |
|
Apr 24, 2008 - 2:21 AM
|
|
 Enthusiast Joined Oct 10, '03 From Wichita, KS Currently Offline Reputation: 5 (100%) |
QUOTE(6gsillyca @ Apr 24, 2008 - 2:18 AM) [snapback]667601[/snapback] Not sure how it is mounted from the factory, but mine is on the firewall. Will try and get a pic of it tomorrow. How long is your wire? The 1st one I got (with my mr2 kit) was 11". The 2nd one (from 1sttoyota, with the P/N you supplied) was also 11". You mentioned the alltrac wire is longer.. That's what I had read when I was researching the proper wire kit for our swap... --------------------  Project ST204.5 99.88946% complete... |
Posts in this topic
6gsillyca 2 gen 3sgte coil wire Apr 6, 2008 - 4:37 PM
WannabeGT4 92-93 All-Trac Coil Wire:
19590-74150
$9.08 f... Apr 6, 2008 - 9:13 PM jgreening That coil wire has never been replaced since the s... Apr 6, 2008 - 10:22 PM
6gsillyca QUOTE(jgreening @ Apr 6, 2008 - 9:22... Apr 6, 2008 - 11:42 PM WannabeGT4 Dunno about that. I use the Toyota EPC to find my ... Apr 7, 2008 - 9:10 AM lagos you normally just look up celica or mr2, and then ... Apr 7, 2008 - 2:05 PM 6gsillyca QUOTE(lagos @ Apr 7, 2008 - 1:05 PM)... Apr 8, 2008 - 11:59 AM 6gsillyca So I got my shipment from 1sttoyotaparts with my c... Apr 23, 2008 - 10:27 PM WannabeGT4 That's the wire I used and it fits fine with t... Apr 24, 2008 - 2:15 AM 6gsillyca That is what I have read aswell, but was not able ... Apr 24, 2008 - 2:25 AM WannabeGT4 QUOTE(6gsillyca @ Apr 24, 2008 - 2:2... Apr 24, 2008 - 2:37 AM 6gsillyca Your dizzy looks like it is mounted closer to the ... Apr 24, 2008 - 11:19 AM DEATH From memory his stuff looks like MR2 parts whereas... Apr 24, 2008 - 11:27 AM 6gsillyca I would assume my parts are *mostly* mr2 parts, as... Apr 24, 2008 - 11:46 AM DEATH Damnit on second look both of yours look like MR2 ... Apr 24, 2008 - 11:50 AM WannabeGT4 My bracket is the stock 94-95 bracket for the igni... Apr 24, 2008 - 11:50 AM 6gsillyca Wannabe, your ignitor is also facing towards the f... Apr 24, 2008 - 1:47 PM WannabeGT4 QUOTE(6gsillyca @ Apr 24, 2008 - 1:4... Apr 24, 2008 - 1:52 PM 6gsillyca Is your dist. in the stock location? It looks like... Apr 24, 2008 - 1:56 PM WannabeGT4 QUOTE(6gsillyca @ Apr 24, 2008 - 1:5... Apr 24, 2008 - 1:59 PM 6gsillyca I thought it was the pic angle as well but your ig... Apr 24, 2008 - 2:12 PM WannabeGT4 QUOTE(6gsillyca @ Apr 24, 2008 - 2:1... Apr 24, 2008 - 2:48 PM DEATH Sorry it took me so long - I ended up having to wa... Apr 24, 2008 - 3:08 PM 6gsillyca Well I connected the dist end up and it looks like... Apr 24, 2008 - 3:19 PM DEATH Mine is the one for the '93 altrac - got it fr... Apr 24, 2008 - 3:27 PM 6gsillyca Well a 92-93 alltrac is the P/N Wannabe supplied m... Apr 24, 2008 - 3:53 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 21st, 2025 - 6:12 AM |