![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Jan 13, '06 From UnderTheGround403 Currently Offline Reputation: 2 (100%) ![]() |
I have a 93 3sgte (from an sw20) and therefore my ign wires have the clips (as opposed to the plunger style). I orered a tune up set from ats for 93 mr2 and the coil wire I got its a few inches too short compared to the one that is coming off the car. Is there a difference between the coil wire for a mr2 3sgte and a gt4 3sgte? I suspect that on an mr2 the ignitor is mounted closed to the dizzy and would require a shorter wire.
Is there a P/N for just the coil wire? Does anyone know what coil wire I would need to be using? Are the P/N different for 93 mr2 and 93 gt4? |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Jan 13, '06 From UnderTheGround403 Currently Offline Reputation: 2 (100%) ![]() |
Wannabe, your ignitor is also facing towards the front. Did you modify that as well, or just the bracket for the coil?
what is the bracket to the left of the coil/igniter, and what is the grey slatted box attached to the bracket? ![]() ![]() this is what is connected to the bottom of the grey slatted box ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: July 24th, 2025 - 6:56 AM |