6G Celicas Forums

Welcome Guest ( Log In | Register )

> 2 gen 3sgte coil wire, P/N's and differences?
post Apr 6, 2008 - 4:37 PM
+Quote Post
6gsillyca



Enthusiast
***
Joined Jan 13, '06
From UnderTheGround403
Currently Offline

Reputation: 2 (100%)




I have a 93 3sgte (from an sw20) and therefore my ign wires have the clips (as opposed to the plunger style). I orered a tune up set from ats for 93 mr2 and the coil wire I got its a few inches too short compared to the one that is coming off the car. Is there a difference between the coil wire for a mr2 3sgte and a gt4 3sgte? I suspect that on an mr2 the ignitor is mounted closed to the dizzy and would require a shorter wire.

Is there a P/N for just the coil wire? Does anyone know what coil wire I would need to be using? Are the P/N different for 93 mr2 and 93 gt4?
 
Start new topic
Replies
post Apr 24, 2008 - 1:56 PM
+Quote Post
6gsillyca



Enthusiast
***
Joined Jan 13, '06
From UnderTheGround403
Currently Offline

Reputation: 2 (100%)




Is your dist. in the stock location? It looks like yours is somehow closer to the firewall than mine and death's.

It looks like even if I rotated the coil to face forward, I will still need a longer coil wire.

This post has been edited by 6gsillyca: Apr 24, 2008 - 1:58 PM
post Apr 24, 2008 - 1:59 PM
+Quote Post
WannabeGT4



Enthusiast
*****
Joined Oct 10, '03
From Wichita, KS
Currently Offline

Reputation: 5 (100%)




QUOTE(6gsillyca @ Apr 24, 2008 - 1:56 PM) [snapback]667739[/snapback]

Is your dist. in the stock location? It looks like yours is somehow closer to the firewall than mine and death's.


Nope no difference. It's still driven by the intake cam in the stock location. I think it's just the picture. I took it with a mag light and camera phone LOL.


--------------------
IPB Image
Project ST204.5 99.88946% complete...

Posts in this topic
- 6gsillyca   2 gen 3sgte coil wire   Apr 6, 2008 - 4:37 PM
- - WannabeGT4   92-93 All-Trac Coil Wire: 19590-74150 $9.08 f...   Apr 6, 2008 - 9:13 PM
- - jgreening   That coil wire has never been replaced since the s...   Apr 6, 2008 - 10:22 PM
|- - 6gsillyca   QUOTE(jgreening @ Apr 6, 2008 - 9:22...   Apr 6, 2008 - 11:42 PM
- - WannabeGT4   Dunno about that. I use the Toyota EPC to find my ...   Apr 7, 2008 - 9:10 AM
- - lagos   you normally just look up celica or mr2, and then ...   Apr 7, 2008 - 2:05 PM
|- - 6gsillyca   QUOTE(lagos @ Apr 7, 2008 - 1:05 PM)...   Apr 8, 2008 - 11:59 AM
- - 6gsillyca   So I got my shipment from 1sttoyotaparts with my c...   Apr 23, 2008 - 10:27 PM
- - WannabeGT4   That's the wire I used and it fits fine with t...   Apr 24, 2008 - 2:15 AM
- - 6gsillyca   Not sure how it is mounted from the factory, but m...   Apr 24, 2008 - 2:18 AM
|- - WannabeGT4   QUOTE(6gsillyca @ Apr 24, 2008 - 2:1...   Apr 24, 2008 - 2:21 AM
- - 6gsillyca   That is what I have read aswell, but was not able ...   Apr 24, 2008 - 2:25 AM
|- - WannabeGT4   QUOTE(6gsillyca @ Apr 24, 2008 - 2:2...   Apr 24, 2008 - 2:37 AM
- - 6gsillyca   Your dizzy looks like it is mounted closer to the ...   Apr 24, 2008 - 11:19 AM
- - DEATH   From memory his stuff looks like MR2 parts whereas...   Apr 24, 2008 - 11:27 AM
- - 6gsillyca   I would assume my parts are *mostly* mr2 parts, as...   Apr 24, 2008 - 11:46 AM
- - DEATH   Damnit on second look both of yours look like MR2 ...   Apr 24, 2008 - 11:50 AM
- - WannabeGT4   My bracket is the stock 94-95 bracket for the igni...   Apr 24, 2008 - 11:50 AM
- - 6gsillyca   Wannabe, your ignitor is also facing towards the f...   Apr 24, 2008 - 1:47 PM
|- - WannabeGT4   QUOTE(6gsillyca @ Apr 24, 2008 - 1:4...   Apr 24, 2008 - 1:52 PM
- - 6gsillyca   Is your dist. in the stock location? It looks like...   Apr 24, 2008 - 1:56 PM
|- - WannabeGT4   QUOTE(6gsillyca @ Apr 24, 2008 - 1:5...   Apr 24, 2008 - 1:59 PM
- - 6gsillyca   I thought it was the pic angle as well but your ig...   Apr 24, 2008 - 2:12 PM
|- - WannabeGT4   QUOTE(6gsillyca @ Apr 24, 2008 - 2:1...   Apr 24, 2008 - 2:48 PM
- - DEATH   Sorry it took me so long - I ended up having to wa...   Apr 24, 2008 - 3:08 PM
- - 6gsillyca   Well I connected the dist end up and it looks like...   Apr 24, 2008 - 3:19 PM
- - DEATH   Mine is the one for the '93 altrac - got it fr...   Apr 24, 2008 - 3:27 PM
- - 6gsillyca   Well a 92-93 alltrac is the P/N Wannabe supplied m...   Apr 24, 2008 - 3:53 PM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: July 22nd, 2025 - 1:09 PM