Help on how to cut the crashbar in order to fit a gtfour bumper, i look on the forums but could not find any post about it.. Options

[joehernandez]

im doing the gt four conversion but i wanted to cut my crashbar so that the gtfour bumper fits
long time ago a member posted pretty detailed info on it, but i could not find it.
si i wanted to know if some one could tell me were to cut and how.
here is a pic of the crash bar

[ScoobyDooCruiser]

Joe,

If you lay the old crashbar inside of the new bumper, you'll see why it does not fit. You'll end up having to basically cut off the bottom two of the three horizontal sections, as well as cutting an angle into both the edges. Its pretty thick aluminum, and so it would take a while with a hacksaw. I would recommend just getting someone who has a good metal cutter to help you out. I can upload pictures later of mine (I ended up getting the real gt4 crashbar about 6 months after I did the conversion, so the cut-up one is sitting in my garage.)

Let me know if you want the pictures.

[joehernandez]

Joe,

If you lay the old crashbar inside of the new bumper, you'll see why it does not fit. You'll end up having to basically cut off the bottom two of the three horizontal sections, as well as cutting an angle into both the edges. Its pretty thick aluminum, and so it would take a while with a hacksaw. I would recommend just getting someone who has a good metal cutter to help you out. I can upload pictures later of mine (I ended up getting the real gt4 crashbar about 6 months after I did the conversion, so the cut-up one is sitting in my garage.)

Let me know if you want the pictures.

ok great,,
one user posted images but he only cut one section,,,,
please send me your pics to check them out,
also how much did you paide for the gt four crash bar?