 2 gen 3sgte coil wire, P/N's and differences? |
 Apr 6, 2008 - 4:37 PM
|
 
|
 Enthusiast  Joined Jan 13, '06 From UnderTheGround403 Currently Offline Reputation: 2 (100%)  |
I have a 93 3sgte (from an sw20) and therefore my ign wires have the clips (as opposed to the plunger style). I orered a tune up set from ats for 93 mr2 and the coil wire I got its a few inches too short compared to the one that is coming off the car. Is there a difference between the coil wire for a mr2 3sgte and a gt4 3sgte? I suspect that on an mr2 the ignitor is mounted closed to the dizzy and would require a shorter wire.
Is there a P/N for just the coil wire? Does anyone know what coil wire I would need to be using? Are the P/N different for 93 mr2 and 93 gt4? |
 |
Replies
|
Apr 24, 2008 - 3:08 PM
|
|
 Enthusiast Joined Dec 19, '07 From tx Currently Offline Reputation: 22 (100%) |
Sorry it took me so long - I ended up having to wait for my next break.
Mines: -12.5" long -stock -'93 RC Motor 2nd Gen -Has tons of extra slack Hope this helps somehow This post has been edited by DEATH: Apr 25, 2008 - 11:12 AM --------------------  ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI] PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYO SUSP: Tein/Bilstein/SusTech/ INT: SS-III SEATS/Toyota Hyper Sports EXT: WRC/TRD/404 QUOTE (lagos @ Aug 25, 2010 - 10:13 AM)  Its a safety feature so that people like you don't end up killing themselves or everyone around them. Slow down Paul Walker. 6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url] |
Posts in this topic
6gsillyca 2 gen 3sgte coil wire Apr 6, 2008 - 4:37 PM
WannabeGT4 92-93 All-Trac Coil Wire:
19590-74150
$9.08 f... Apr 6, 2008 - 9:13 PM jgreening That coil wire has never been replaced since the s... Apr 6, 2008 - 10:22 PM
6gsillyca QUOTE(jgreening @ Apr 6, 2008 - 9:22... Apr 6, 2008 - 11:42 PM WannabeGT4 Dunno about that. I use the Toyota EPC to find my ... Apr 7, 2008 - 9:10 AM lagos you normally just look up celica or mr2, and then ... Apr 7, 2008 - 2:05 PM 6gsillyca QUOTE(lagos @ Apr 7, 2008 - 1:05 PM)... Apr 8, 2008 - 11:59 AM 6gsillyca So I got my shipment from 1sttoyotaparts with my c... Apr 23, 2008 - 10:27 PM WannabeGT4 That's the wire I used and it fits fine with t... Apr 24, 2008 - 2:15 AM 6gsillyca Not sure how it is mounted from the factory, but m... Apr 24, 2008 - 2:18 AM WannabeGT4 QUOTE(6gsillyca @ Apr 24, 2008 - 2:1... Apr 24, 2008 - 2:21 AM 6gsillyca That is what I have read aswell, but was not able ... Apr 24, 2008 - 2:25 AM WannabeGT4 QUOTE(6gsillyca @ Apr 24, 2008 - 2:2... Apr 24, 2008 - 2:37 AM 6gsillyca Your dizzy looks like it is mounted closer to the ... Apr 24, 2008 - 11:19 AM DEATH From memory his stuff looks like MR2 parts whereas... Apr 24, 2008 - 11:27 AM 6gsillyca I would assume my parts are *mostly* mr2 parts, as... Apr 24, 2008 - 11:46 AM DEATH Damnit on second look both of yours look like MR2 ... Apr 24, 2008 - 11:50 AM WannabeGT4 My bracket is the stock 94-95 bracket for the igni... Apr 24, 2008 - 11:50 AM 6gsillyca Wannabe, your ignitor is also facing towards the f... Apr 24, 2008 - 1:47 PM WannabeGT4 QUOTE(6gsillyca @ Apr 24, 2008 - 1:4... Apr 24, 2008 - 1:52 PM 6gsillyca Is your dist. in the stock location? It looks like... Apr 24, 2008 - 1:56 PM WannabeGT4 QUOTE(6gsillyca @ Apr 24, 2008 - 1:5... Apr 24, 2008 - 1:59 PM 6gsillyca I thought it was the pic angle as well but your ig... Apr 24, 2008 - 2:12 PM WannabeGT4 QUOTE(6gsillyca @ Apr 24, 2008 - 2:1... Apr 24, 2008 - 2:48 PM 6gsillyca Well I connected the dist end up and it looks like... Apr 24, 2008 - 3:19 PM DEATH Mine is the one for the '93 altrac - got it fr... Apr 24, 2008 - 3:27 PM 6gsillyca Well a 92-93 alltrac is the P/N Wannabe supplied m... Apr 24, 2008 - 3:53 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 27th, 2025 - 11:06 AM |