![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Jan 13, '06 From UnderTheGround403 Currently Offline Reputation: 2 (100%) ![]() |
I have a 93 3sgte (from an sw20) and therefore my ign wires have the clips (as opposed to the plunger style). I orered a tune up set from ats for 93 mr2 and the coil wire I got its a few inches too short compared to the one that is coming off the car. Is there a difference between the coil wire for a mr2 3sgte and a gt4 3sgte? I suspect that on an mr2 the ignitor is mounted closed to the dizzy and would require a shorter wire.
Is there a P/N for just the coil wire? Does anyone know what coil wire I would need to be using? Are the P/N different for 93 mr2 and 93 gt4? |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Jan 13, '06 From UnderTheGround403 Currently Offline Reputation: 2 (100%) ![]() |
Well I connected the dist end up and it looks like it SHOULD reach the coil if I remount it to face forwards, so I guess when it warms up and I have some free time I will try and juggle them around.
My old coil wire was around 12". Can't seem to find a P/N for the 12" wire though... |
![]() ![]() |
Lo-Fi Version | Time is now: July 24th, 2025 - 2:22 AM |