drilled and sloted Options

[Dragondog]

where is a good place i can get drilled and sloted rotors......no i wont do it to standerd disks......i found a place in ca that sells them for 69$ for frt pair what do you think others for 107$ a disk

[DEATH]

I'm not going to get involved in this arguement as i can see it from both sides of the fence. I do, however have a few practical points that should be considered:

1. My car is swapped with all the extra HP/Tq that brings and my OEM pads and rotors are perfectly sufficient [altho I do wish I had the 4 channel ABS my old 6GC had - that was superior braking power with confidence]
2. There is something to be said for aesthetics as well. Drilled and/or slotted rotors just plain look good behind some nice rims. It's kind of like painting your calipers. It makes it look like you have Brembo style brake upgrades regardless of whether or not they actually upgrade the stopping power. Some call that rice, some call it show - meh w/e. They do look good.
3. Aesthetics should never be favored over safety. If you're gonna go with my point #2 just make sure you get some from a reputable brand like Brembo etc. Don't get some off brand Ebay crap and trust your life/car to it.

That's just my .02.
Someone should run a search and talley up the shear amount of threads that have been generated on this subject over the life of 6gc.net - I think this one almost outnumbers the fabled 2jz swap foolishness that has haunted this site for far too long.

This post has been edited by DEATH: Apr 25, 2008 - 9:36 AM