7agze project, what motor Options

[xinginteg]

...

This post has been edited by xinginteg: Aug 25, 2009 - 9:31 PM

[xinginteg]

...

This post has been edited by xinginteg: Aug 25, 2009 - 9:32 PM

[nik]

I have decided to do the 7agze project I am starting right away and will begin to start ordering parts. There is only one thing that is starting to really scare me. When my car is around 1200 rpm there is this weird noise coming from the engine. Its not that loud but it sound like someone is taping there fingers on wood and it always sounds the same. If i rev higher it stops, it has had this noise for months now and it runs great, never any issues.

Regardless here are the main parts that I am ordering
4agze Pistons
Belfab forged 7afe H-beam rods when they are available
4agze head and supercharger
Inter cooler
ECU EMS 8860
I am having the dual exhaust custom built by a local meineke that has a few guys that know their stuff.
supra (7mgte) injectors
supra TT fuel pump
AEM cam gears
Now of course the part list is going to be a lot bigger than this but everything else will probably be OEM things that just have to be replaced.

Also does anybody know if AEM camshaft are available for this car?
If it gets to hard to find parts I will do the 7afte top end instead.

i would go with after market pistons instead of the 4agze the cost diff is not that bad
here is a small list of the things i have on my 7agte

4ag big port head
- stage 2 port and polish
-port and gasket match
- ferrea valves
- TRD springs and retainers
-Aries pistons (8.6:1) 81.50mm
-Puater custom 4340 chromoly rods 20 mm pins
-Innovation turbo 475hp capable @ crank
-B series honda manifold cut and 4ag welded flange
-38mm turbonetics wastegate
-Greddy RS bov
-greddy Profec B boost controller
-custom aluminum intercooler piping
-custom 3" downpipe
-32x8x3 intercooler
-greddy oil catch tank
-SDS standalone engine management
-hks cam gears both
-Crower camshafts (272 in. , 272 ex.)
-arp head bolt
-fully balanced rods, pistons, crank , flywheel, underdrive pulley
-oem flywheel
-ACT 6 puck clutch
-83lb/hr injectors
-walbro 255 lph intank fuel pump
- Phantom grip lsd with upgrade springs