 Sticking Clutch Pedal |
 Dec 7, 2006 - 7:19 AM
|
 
|
 Enthusiast  Joined Mar 29, '06 From Hull, UK Currently Offline Reputation: 0 (0%)  |
Ok, every day when I've been sitting at lights or in traffic with my foot on the clutch pedal, I go to let off the pedal and it bites immediately (no play at all) and the pedal only moves upwards about an inch. If I put my foot under the pedal and lift slightly then it springs back the remaining 3 inches it normally travels. When driving and changing normally it doesn't stick, and the biting point is about an inch from fully depressed, its only after having it depressed for a short while, whilst in gear.
If I don't have it in gear and depress it for a while then release it never sticks down. Any ideas? Is there any joints that I could lubricate that may free it off (inside the car or in the engine bay) |
 |
Replies
|
May 1, 2008 - 6:08 AM
|
|
 Enthusiast Joined Apr 11, '06 From Tasmania Currently Offline Reputation: 0 (0%) |
Something is happening to my pedal today, drove to work about 25km fine, drove back fine, but went down the street at the pedal feels harder to push in? checked fluid levels all seems to look normal.
any help. -------------------- Ok Gladys, lets play house, you be the door and I'll shut you.
 |
Posts in this topic
vsideboy Sticking Clutch Pedal Dec 7, 2006 - 7:19 AM
GMoney Check ur clutch master cylinder, that happen to me... Dec 7, 2006 - 8:31 AM vsideboy I was hoping it wasn't that, but I cannot unde... Dec 7, 2006 - 8:36 AM GMoney Your Clutch uses a spring right ? Dec 7, 2006 - 8:38 AM Vissi It realy sounds like a master cylinder.
Same thin... Dec 7, 2006 - 8:41 AM vsideboy Personally I don't know too much about the clu... Dec 7, 2006 - 8:44 AM hurley97 yes theres a spring for your clutch pedal. if you ... Dec 7, 2006 - 3:56 PM y2komar It has happend to me. This seems to me a common p... Dec 8, 2006 - 11:52 AM masterluie214 im having the same problem right now with mine....... Dec 9, 2006 - 5:36 AM gnetik I am sure that the problem lies with the clutch ma... Dec 11, 2006 - 12:41 AM vsideboy I will price one up.
I can just about manage to s... Dec 11, 2006 - 5:42 AM
BloodyStupidDavey "stand clear, shocking!"
"threa... Apr 30, 2008 - 12:18 PM alltracman78 Most likely it's the master cylinder.
Sitting... Apr 30, 2008 - 10:02 PM vsideboy Erm, oops, my solution was to buy an ST205 mate, I... May 1, 2008 - 3:30 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 16th, 2025 - 5:13 PM |