SilvertopST's 7afte Build Options

[SilvertopST]

after much debating i have decided to go with a 7afte build instead of swapping the motor. i ahve read most of the builds on this site and gathered as much info as i could and have decided to start my own thread for my build.

Here is a list of the parts i will be using for this build:

stock 7afe with only 60k original miles (it was truly granny driven)
Walboro 170 fuel pump (3sgte) - PURCHASED
Greddy Emanage blue with ignition and fuel harnesses - Awaiting Stimulus Check
Supra Injectors
NKG Spark Plugs (2 degrees colder)
Custom Manifold and Downpipe (courtesy of Mainstream Performance)
T-25 turbo (Rebuilt DSM)
Turbo XS Boost controller
GM MAP Sensor
OEM DSM BOV (1g or 2g eclipse)
OEM SRT-4 Intercooler
2.5" Intercooler Piping
Tapped oil pan
Oil feed lines
Dyno tune at 12psi

i am shooting for 200whp but would be content with between 180 and 200 whp


any info and advice as well as encouragement would be greatly appreciated, and i will update this as much as possible as the parts come in.

This post has been edited by SilvertopST: May 12, 2008 - 6:16 PM

[SilvertopST]

On saturday I purchased an OEM Walboro 170 Fuel pump (3sgte) off a friend who had one sitting in his garage for cheap.



it should work fine considering the stock hp of the 3sgte is above my current goals

This post has been edited by SilvertopST: May 12, 2008 - 6:27 PM