![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Aug 31, '05 From Houston TX Currently Offline Reputation: 7 (100%) ![]() |
well i just finish putting the engine in and wiring up the car. Well i start to crank it but it wont start. i check for spark and theres spark. i check for fuel and turns theres no power to the fuel pump or injector. well i disconected the fuel line that goes on my filter and gasoline started to spray everywhere. i cant think of anything except the fuses, well i checked and none are burned . now iam running out of ideas and dont know what to do . i called doctor tweak and he was helping me go through to daignose my car but i cant use a multimeter lol so i told i called him when i find someone that can. so now am looking for help here at the forums , any help would be apreciated.
-------------------- |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Apr 4, '05 From ST PAUL, MN Currently Offline Reputation: 3 (100%) ![]() |
well the reason for mine not starting was that wires on the wiring harness that was suppost to kick the clutch pedal sensor to kick the starter was switch around i dont know if the third or the 2nd gen is different,but ask tweak..
-------------------- ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: July 18th, 2025 - 3:19 PM |