on convertibles and kits., what fits. Options

[njccmd2002]

im looking around the site, and i see all that does not fit in the vert, due to it being a coupe.

apart from the Hiro wing in the back, and the west wing what else fits on the back. I know the splitters dont work at all.

The front bumper is the same as any 96 lifted, so anything works. but the back worries me, as i have side skirts, and installin a lip in the future will make the back look ugly.


so, what have other coupes found. and yes i went through the parts database and all

[goferris]

you could do the TRD curren rear splitters, as well as some curren hiro splitters (blinky has some on his coupe)
i know a few people have modified a 404 lip to fit.
sadly i think that's about it for the coupe/vert rear end.
the hiro splitters would probably look the best IMO but they are nearly impossible to find. even replicas of them are untraceable
there was a GB a few years back i believe but the only person i know of that has them is blinky
are you just going to keep the stock vert skirts? if so the only rear that won't look horribly out of place is the hiro IMO.
if you were to get diff skirts (404 FTW) i would get some TRD curren splitters.
i wouldn't get much of a spoiler on a vert though. they tend to look out of place unless it's something simple like what vincent doggy has. small lip spoiler.
now someone correct me if i'm wrong, but the oem/ssIII skirts won't fit the verts (right?) but most other skirts will though.
is that what you were looking for or did i miss the whole point of the Q