 Motor Mount Help, just a slight snag |
 May 10, 2008 - 6:26 PM
|
 
|
 Enthusiast  Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%)  |
basically the crossmember does not have enough room to slide under the motor mount bolts
art u can use this to see what i am running into i tried to move the engine up but due to the due to the 5s being positioned at an angle. it does not really move as high as i want it to suggestions would be great    --------------------  1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
 |
Replies
|
Jun 6, 2008 - 9:58 AM
|
|
|
Enthusiast Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) |
YAAAAAY MY 1000th POST
it was a pain to put it in for mine. Lagos came over and helped. removed the exhaust hanger jig that lays behind the mount. basically what you have to do is to adjust the motor. jack it up under the oil pan and on the trans. you will see how the motor moves and if you either get more room when you jack it up or let it down. there are 4 bolts on either side of the subframe that we took out. 3 are in plain sight and the other is up high where the suspension is. we put the mount piece in place and then tried to slide the crossmember under it. and then align the bolts through the holes. oh and for a little more space, you can knock the bolts on the mount loose so they can move back a little, so u have that extra 1/4 inch of room now get a light. really. you will need one patience and help from a friend is highly advised. -------------------- 1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
Posts in this topic
Tigawoods Motor Mount Help May 10, 2008 - 6:26 PM
Bitter pry the cross member down a little May 10, 2008 - 6:34 PM Remy I had the same problem when I was putting in my po... May 10, 2008 - 6:42 PM Havok1997GT Dude. this took me, DEATH and his girl 2 days to d... May 10, 2008 - 7:44 PM Tigawoods haha yeah same i started friday
i will try a few ... May 10, 2008 - 8:55 PM crandsberry That crossmember is a pain!
A trick i used wh... May 11, 2008 - 3:47 AM malecrod If you are still having issues, here is a little t... May 11, 2008 - 7:16 PM Tigawoods i will try a few of these out tomorrow morning
th... May 11, 2008 - 10:23 PM Havok1997GT Up date? May 14, 2008 - 2:09 AM Tigawoods haha sorry. art(lagos) came over on monday to help... May 14, 2008 - 7:21 PM Havok1997GT damn dude. thats seems like a lot more work then ... May 18, 2008 - 9:59 PM creis yup went though that last weekend, misserable desi... May 18, 2008 - 10:20 PM Tigawoods yeah i took mine off and left it off May 18, 2008 - 10:30 PM CelicaGTWolf sup ppl. just a quick question. i'm having thi... Jun 6, 2008 - 9:37 AM CelicaGTWolf ty much for the fast response. yea, i just tried a... Jun 6, 2008 - 10:29 AM Tigawoods so you didnt get Kirk's inserts? those are wha... Jun 6, 2008 - 10:41 AM lagos Just unbolt the drivers side of the sub frame (hug... Jun 6, 2008 - 11:10 AM stephen_lee what i did was kept the engine on the lift and got... Jun 6, 2008 - 3:50 PM CelicaGTWolf thx for the help guys. finally got it completed. i... Jun 6, 2008 - 4:27 PM Tigawoods haha i envy you for getting it in faster than me... Jun 6, 2008 - 10:04 PM
azn87 how do u break a motormount because i have to repl... Jun 8, 2008 - 8:48 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 21st, 2025 - 7:22 PM |