What kind of shop installs........................

Welcome Guest ( Log In | Register )

6G Celicas Forums > 6th Generation Celica > Engine/Transmission/Maintenance

What kind of shop installs........................, UNDERDRIVE PULLEYS?????

Oct 21, 2003 - 12:03 AM
PlanetFuzz View Member Profile Enthusiast Joined Mar 9, '03 From Knoxville,TN Currently Offline Reputation: 0 (0%)	What kind of shop would install an underdrive pulley?. One can't be installed yourself..or can it? Thanks!

Replies

Oct 22, 2003 - 5:17 PM

1bwilson

Enthusiast

Joined Aug 30, '02
From Maryland
Currently Offline

Reputation: 8 (100%)

QUOTE (Kwanza @ Oct 21, 2003 - 8:32 AM)

QUOTE (van95st @ Oct 21, 2003 - 2:06 AM)

it's not too difficult use these steps

Correct, for ST's... but it's a pain in the arse for GT's... trust me. The pulley sits right by the firewall and there is no way to get it out without lifting or dropping the motor. All of the steps provided are correct, however, minus the tight-fit problem, unbolting of motor mounts, and lifting/dropping the engine.

I put my UR pully in with the motor still in the mounts. Its tight but like they already said just pull the plastic off and its right there. I took me a hell of alot of time cause that was the first motor mod I ever did to my car but Id say its a 2 hour job.

-Bryan-

--------------------

Member of Team 5sfTe

Posts in this topic

PlanetFuzz What kind of shop installs........................ Oct 21, 2003 - 12:03 AM

1bwilson QUOTE (PlanetFuzz @ Oct 20, 2003 - 10:03 PM) What ... Oct 21, 2003 - 12:42 AM

PlanetFuzz Is this hard? Does it require more than one person... Oct 21, 2003 - 12:52 AM

van95st oops Oct 21, 2003 - 4:04 AM

van95st it's not too difficult use these steps 1. lik... Oct 21, 2003 - 4:06 AM

Matthew ALASKA!!!! i think you are our on... Oct 21, 2003 - 4:08 AM

van95st thanks !!!!!! Oct 21, 2003 - 6:14 AM

Kwanza QUOTE (van95st @ Oct 21, 2003 - 2:06 AM) it's ... Oct 21, 2003 - 10:32 AM

PlanetFuzz So you either have to drop or lift the motor inord... Oct 21, 2003 - 12:34 PM

van95st a bit off the subject but does the timing belt on ... Oct 21, 2003 - 5:26 PM

D-No-One QUOTE (PlanetFuzz @ Oct 21, 2003 - 10:34 AM) So yo... Oct 21, 2003 - 8:14 PM

PlanetFuzz Can you actually feel a difference with an underdr... Oct 21, 2003 - 10:28 PM

1bwilson QUOTE (Kwanza @ Oct 21, 2003 - 8:32 AM) QUOTE (van... Oct 22, 2003 - 5:17 PM

Junior Any shop can change a pulley. Oct 22, 2003 - 5:46 PM

PlanetFuzz But can you feel a difference?? Oct 22, 2003 - 10:11 PM

PlanetFuzz PLease!! somebody?? can you feel a differe... Oct 23, 2003 - 4:13 PM

D-No-One QUOTE (PlanetFuzz @ Oct 23, 2003 - 2:13 PM) P... Oct 24, 2003 - 12:56 AM

« Next Oldest · Engine/Transmission/Maintenance · Next Newest »

1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)

0 Members:

Display Mode: Switch to: Standard · Switch to: Linear+ · Outline

Track this topic · Email this topic · Print this topic · Subscribe to this forum

Lo-Fi Version

Time is now: June 18th, 2025 - 11:53 PM