Help on clear sides and turns Options

[Athorn]

I have a 95 celica and im looking for clear sides and turns. i found the sides on ebay http://cgi.ebay.com/ebaymotors/94-99-TOYOT...sspagenameZWDVW but i cant find the front clear urns for my car. is there a differnece between the lights from a 95, and a 96 and up? Thanks for the help.

[CelicaST_CALI]

wait,did u have turns when i saw it....i didnt look lol

[808celica]

wait,did u have turns when i saw it....i didnt look lol

no i didnt i wish i did but i didnt have any adhesive substance to use

yes the amber looks nice but it would hurt to have clears. especially when i got the signal housings free

[wolfie308]

wait,did u have turns when i saw it....i didnt look lol

no i didnt i wish i did but i didnt have any adhesive substance to use

yes the amber looks nice but it would hurt to have clears. especially when i got the signal housings free

One tip regards removing the lenses, I'd suggest only putting one unit in the oven at a time, and placing them on an oven glove rather than a metal tray to reduce chance of damage. When refitting my clears, no extra adhesive is required as they are the exact shape and priofile that they fit perfect using the original mastic left in the groove round the edge.It's a good idea to thoroughly wash the units in warm soapy water and using a small flat screwdriver, poke the remaining mastic evenly down into the channel all round.

If you're as fussy as me, you might like to mask off the edgewith the mastic in and then chrome spray the reflector which will probably look rather dull. This brightens the whole look of the unit and is well worth the trouble IMHO.

I'm just finishing a couple of pairs so I'll post a close up pic later so you can see the detail