Jun 20, 2008 - 11:24 AM
|
|
|
Enthusiast ![]() Joined May 11, '06 From MD Currently Offline Reputation: 0 (0%) |
My 95 gt is making really loud banging noises... like somethings loose almost when I go over the slightest of bumps. The problem is especially bad at low speeds. Had the problem since I bought the car thinking it was a bad strut but never got around to replacing it. Since I've had the car 3 years or so I can notice it progressively worsening over time. Had a mechanic briefly look at it on the ground he said it didn't feel like shocks/struts were bad.
Could it be a wheel bearing. Im about to go out and spin the wheels and listen for any noise but this sounds and feels like I almost have no rear shocks at all. Any suggestions?? let me know if i need to be more detailed... |
![]() |
Jun 24, 2008 - 4:51 PM
|
|
|
Enthusiast ![]() Joined Sep 3, '07 From Czech Republic Currently Offline Reputation: 2 (100%) |
I have the same problem with my ST. When the car was on a jack I found nothing. Then I got under the car when it was standing on a ground and after moving with the anti sway bar I heard it again. It was from the rear-left end link (due to the backlash in the link). A guy from local Toyota dealer told me that I can't hear the noise when the car is on the jack because the wheels are low, springs stretched and end links tightened.
So I ordered new end links (front + rear) and hope that this will solve the problem. Another recommendation from the Toyota man was to change the bushings too. |
Jun 29, 2008 - 10:31 AM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
I have the same problem with my ST. When the car was on a jack I found nothing. Then I got under the car when it was standing on a ground and after moving with the anti sway bar I heard it again. It was from the rear-left end link (due to the backlash in the link). A guy from local Toyota dealer told me that I can't hear the noise when the car is on the jack because the wheels are low, springs stretched and end links tightened. So I ordered new end links (front + rear) and hope that this will solve the problem. Another recommendation from the Toyota man was to change the bushings too. Thats good to change, most likely that solves your problem. I've seen it before on my camry. -------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
Bradley Clanking noise in the rear!! Jun 20, 2008 - 11:24 AM
LewFX did you do anything to your car at all?
could be:... Jun 20, 2008 - 11:43 AM
pipes rear sway bar bushings check them Jun 20, 2008 - 11:47 AM
ETNRIDER Try pulling your ebrake up slowly at a slow speed ... Jun 20, 2008 - 12:52 PM
trdproven Rear sway bushings, end links, knuckle bushings. ... Jun 20, 2008 - 10:57 PM
Batman722 QUOTE (pipes @ Jun 20, 2008 - 12:47 ... Jun 20, 2008 - 11:01 PM
Bradley I tightened up the e-brake a couple days ago and t... Jun 21, 2008 - 1:49 AM
808celica jack up the car and see if the wheel rocks when yo... Jun 21, 2008 - 6:19 AM
shane1 QUOTE (Bradley @ Jun 20, 2008 - 11:2... Jun 27, 2008 - 5:07 AM
djyohimbe If you have a hatch it could be that it's a bi... Jun 28, 2008 - 12:25 PM
Athorn I have this same exact problem in the rear of my c... Jun 29, 2008 - 10:14 PM
Urputus QUOTE (trdproven @ Jun 29, 2008 - 11... Jul 1, 2008 - 3:49 PM
Bigwaaagh I think I have the same problem. The sound comes f... Jul 6, 2008 - 11:55 AM
jason im with batman... sway bar bushings... Jul 6, 2008 - 12:52 PM
CelicaGT04 QUOTE (Bigwaaagh @ Jul 6, 2008 - 11... Jul 6, 2008 - 1:00 PM
rock39 tie rod,torn cv boot, strut mounts warped. Jul 6, 2008 - 3:38 PM
Bigwaaagh OK, any known ways of visually confirming any of t... Jul 7, 2008 - 3:46 AM
Maxtumare lol everyone is giving you some big response to yo... Jul 16, 2008 - 9:24 AM
CelicaGT04 For wheel bearing, when you lift the car on a jack... Jul 16, 2008 - 11:10 AM
Bigwaaagh Ok, thanks for the tips, will check it all out whe... Jul 21, 2008 - 5:02 PM
Athorn Can someone post a pic of what the sway bar brushi... Aug 7, 2008 - 10:57 PM
Urputus QUOTE (Athorn @ Aug 7, 2008 - 11:57 ... Aug 11, 2008 - 2:55 PM
convert This is my first post on this site.
I have '9... Aug 14, 2008 - 6:50 PM
convert Further to my last post, the clanking returned to ... Aug 31, 2008 - 3:48 PM![]() ![]() |
| Lo-Fi Version | Time is now: November 25th, 2025 - 5:20 PM |