 Dirty Engine... |
 Jun 30, 2008 - 1:27 PM
|
 
|
 Enthusiast  Joined Jun 2, '08 From Wisconsin Currently Offline Reputation: 0 (0%)  |
What could I use to clean the engine so it doesnt have that corroded look to it? The metal looks blotchy and dirty but when I try to wipe it off with something nothing happens...the rest of the car still looks beautiful except the engine block. I did the hoses and lines so those are pretty clean I just dont know what to do about the block. Heres a pic of what I mean...
  
--------------------  1997 Toyota Celica GT Hatchback- Sold :( 2000 Toyota Celica GT- Sold :( 1997 Lexus SC400- Daily :D |
 |
Replies
|
Jul 2, 2008 - 8:04 AM
|
|
 Enthusiast Joined Apr 26, '07 From Nottingham, UK & sometimes Boston, MA Currently Offline Reputation: 0 (0%) |
Just hand torqued them with a ratchet mate, if you miss-torque them and allow air into the ACIS you will know about it - idle will go nuts! Be careful not to get any paint on the gasket too tho of course.
This was a few months ago, but iirc they were 10mm hexagon flange bolts so the correct torque would be 29NM / 21ft/lbs as they are Class 4T i believe - could be off tho 
|
|
Jul 2, 2008 - 10:51 AM
|
|
 Enthusiast Joined Feb 11, '08 From Auckland, New Zealand Currently Offline Reputation: 0 (0%) |
QUOTE (Vince-Noir @ Jul 3, 2008 - 1:04 AM)  Just hand torqued them with a ratchet mate, if you miss-torque them and allow air into the ACIS you will know about it - idle will go nuts! Be careful not to get any paint on the gasket too tho of course. This was a few months ago, but iirc they were 10mm hexagon flange bolts so the correct torque would be 29NM / 21ft/lbs as they are Class 4T i believe - could be off tho Cheers for the info, 10mm is pretty standard, would a small hand rachet be suffice to tighten it back up?, I like red manifold. Anything I should know before I go unbolting? Or just to remember what hoses go where and not to lose the bolts? -------------------- Mike W
1996 Toyota Celica ST205 GT-FOUR GT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC 269awhp / 273ft-lbs |
Posts in this topic
-Samurai- Dirty Engine... Jun 30, 2008 - 1:27 PM
Tigawoods get a metal wire brush and clean it off with that. Jun 30, 2008 - 1:29 PM zero07 S.O.S soap pads first, with verry little water aro... Jun 30, 2008 - 7:34 PM Stambo i took the valve cover off my 7afe put a bunch of ... Jun 30, 2008 - 8:32 PM delusionz On my old Celica with a similar engine and I purch... Jul 1, 2008 - 6:11 AM njccmd2002 or pay 55 sent it to get it powder coated just lik... Jul 1, 2008 - 6:20 AM
-Samurai- QUOTE (njccmd2002 @ Jul 1, 2008 - 7... Jul 2, 2008 - 3:10 PM delusionz Powder coat makes a nicer colour but yours looks v... Jul 1, 2008 - 7:04 AM delusionz Looking at the pics on that page the powder coat d... Jul 1, 2008 - 7:10 AM Vince-Noir I used a product called Autosol on mine - you can ... Jul 1, 2008 - 10:22 AM Slick QUOTE (Vince-Noir @ Jul 1, 2008 - 5... Jul 1, 2008 - 12:05 PM Vince-Noir I took the butterfly valve cover off to be sprayed... Jul 1, 2008 - 2:57 PM delusionz What tools did you use to remove your ACIS manifol... Jul 1, 2008 - 6:09 PM Vince-Noir You've got it really, just remember which hose... Jul 2, 2008 - 11:22 AM lowspirit So after I read this post I tried to get my engine... Jul 10, 2008 - 11:07 AM 97Celica get aluminum oxide sandpaper,fine grit,pop that va... Jul 13, 2008 - 6:28 AM lowspirit This is what I ended up with, posting beginning to... Jul 14, 2008 - 12:01 PM Rusty need I say more? Jul 15, 2008 - 4:07 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: March 21st, 2026 - 9:49 AM |