A few ?s I couldnt find answers to about turboing my 7AFE Options

[phoenix6]

I read the writeup posted on the how to section of the website, Im parting out my 87 Turbo supra ATM and planned on using my CT-26 out of it.... its single entry I know.

The rest of the parts I was confused on a little... Im only looking to get 145 to 150hp from my 7afe while still maintaining reliability if possible.

I was wondering what manifold I use, where I can get the intercooler and IC piping from, so on and so forth. A list of parts is not part of the how to.. if it is, I never noticed it.

TIA for the help guys

BTW, names Phoenix, good friends with Alex (probably known as NgoFckingWay on here, he owns T-Spoon... Manny knows him)

Thnx guys

[bccentaur3]

Can you use the ct-26 single entry? Yes, but you will need the turbo flange mated onto the turbo manifold to accept the turbo.

For the manifold I remember people using the B16/18 turbo manifold and cut the flange that goes on the head off and buy a flange for the 7afe head and weld it onto that. If you want it done right, go to JGSTOOLS.com and order a turbo manifold kit for the 7afe motor. It will make life a lot easier. But then again its pretty pricey.

Can you make 150 whp? I believe you can, but then again I'm a 3sgte guy.

Intercooler, the cheap ebay stuff will be fine. Its not like you are planning on boosting 20 psi. Just get an intercooler kit, that comes with the front mount and piping. You can even get ones with a BOV.

The most important thing and I'm sure you already know, you will need something to tune the supra lime top injectors.

This post has been edited by bccentaur3: Jul 10, 2008 - 7:10 PM