A few ?s I couldnt find answers to about turboing my 7AFE Options

[phoenix6]

I read the writeup posted on the how to section of the website, Im parting out my 87 Turbo supra ATM and planned on using my CT-26 out of it.... its single entry I know.

The rest of the parts I was confused on a little... Im only looking to get 145 to 150hp from my 7afe while still maintaining reliability if possible.

I was wondering what manifold I use, where I can get the intercooler and IC piping from, so on and so forth. A list of parts is not part of the how to.. if it is, I never noticed it.

TIA for the help guys

BTW, names Phoenix, good friends with Alex (probably known as NgoFckingWay on here, he owns T-Spoon... Manny knows him)

Thnx guys

[Harold_Fastwaker]

The CT series turbos do not have a good flow map for the 7a. You really need a T3. You can easily run 200hp on the 7a if you want.

The ebay honda turbo manifolds work but their welds are complete ****. You will need to change out the flange and have that welded on. I suggest also rewelding the support bar as well to make sure it holds up properly.