 How to Swap MR2 Seats into a celica, no soldering required...... and its 100% done. |
 Jul 15, 2008 - 7:53 PM
|
 
|
 Enthusiast  Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%)  |
Well having to many dishes, and only one mouth, decided to start with this project. The TRD bumper is aside.
I went ahead, and bought MR2 seats because of similarities with our seats. One of them being the lower cushion seats as high as ours. And just by looking at it they look similar.... some pics....   now look at the following picture, is that from a celica or mr2  , they look very similar.... took apart the whole thing...  and the pieces are ready to be cleaned....  but one thing that puzzles me, is the fact of the similarities of the seats.... just take a look at the cushion and the trim pieces.... it looks like i tore up a celi seat. the trim pieces are identical.  so this leaves me with a mistery, can i put the cushions of the mr2 on the celi seat track. I dont have a clue yet, but i will try. I am so tired, so i only undid the mr2 seats, i would have to take apart a celi seat and figure out compatibility. Keep you guys posted..... This post has been edited by njccmd2002: Jun 15, 2011 - 12:26 AM -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
 |
Replies
|
Jul 20, 2008 - 3:50 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
one of the most important things, check and ask before you buy, this was ebay, and it was 400 miles away, therefore i could not see the repaired cigarette burn on the drivers side, after washing the seat you can really tell.
  well i repaired it, it does not look perfet, but who cares. i cant see it if im driving... drivers side is already done and mounted...   no, that is not a stain, that is my sweat...  The drivers side was tricky, since is not a perfect fit for the lower cushion, you cannot make the lower adjustment work. I cannot raise the seat, without some resistance, you can fix this by shavin some of the upper torso foam. I did not do it, since i dont raise the seat. It just makes it tight to fit an amp under there....  as for the back seats... sorry shaun, here are your seat covers, i will use the sample to trace on the new fabric.  im looking for a decent fabric. Im making my own covers... sorry for the dog, he got in the way... This post has been edited by njccmd2002: Jun 15, 2011 - 12:32 AM -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
Posts in this topic
njccmd2002 How to Swap MR2 Seats into a celica Jul 15, 2008 - 7:53 PM
d3vil_celica hey can i ask you a question how did you made that... Jul 15, 2008 - 9:03 PM Batman722 the BEST way to swao seat is to use our (your) tra... Jul 15, 2008 - 9:56 PM
njccmd2002 QUOTE (Batman722 @ Jul 15, 2008 - 10... Jul 15, 2008 - 10:08 PM njccmd2002 well half of the work is done. see it and weep ... Jul 16, 2008 - 5:58 PM njccmd2002 well 30 mins in ac and two activia yogurts... dec... Jul 16, 2008 - 6:45 PM lubu QUOTE (njccmd2002 @ Jul 17, 2008 - 7... Jul 17, 2008 - 12:13 AM Batman722 nice. So basicly you just swapped the bottom foam ... Jul 16, 2008 - 10:54 PM njccmd2002 QUOTE (Batman722 @ Jul 16, 2008 - 11... Jul 17, 2008 - 12:56 PM azian_advanced this is cool.. now i wonder if 7th gen leather sea... Jul 17, 2008 - 8:23 AM njccmd2002 QUOTE (azian_advanced @ Jul 17, 2008 - 9... Jul 17, 2008 - 12:49 PM 99GT Cool! Jul 17, 2008 - 1:00 PM lubu Very nice work Norberto, smart man Jul 17, 2008 - 1:03 PM Ugglan Nice work man! Jul 17, 2008 - 5:02 PM njccmd2002 Ran into problems today, but they are fixed. Beca... Jul 17, 2008 - 7:31 PM njccmd2002 final pics for your pleasure. im doing the driver... Jul 17, 2008 - 9:06 PM vile_v WOW! that looks so much better, makes it look ... Jul 17, 2008 - 9:28 PM snapshotgt Very impressive. Looks like this will be on its wa... Jul 17, 2008 - 11:16 PM njccmd2002 QUOTE (snapshotgt @ Jul 18, 2008 - 12... Jul 18, 2008 - 6:51 AM frisp Very nice work Jul 18, 2008 - 8:12 AM Jankerfun That does look awesome... you make it look so easy... Jul 18, 2008 - 9:40 AM BloodyStupidDavey Bump for sticky. Awesome writeup! Oct 17, 2008 - 2:25 PM njccmd2002 thanks, men. i guess it should be stickied.
I... Oct 17, 2008 - 3:39 PM GotToyota What rear seats are you putting in? Oct 17, 2008 - 3:45 PM njccmd2002 these Oct 18, 2008 - 7:57 AM presure2 great work.
the seat looks great in the car.
i wil... Oct 18, 2008 - 8:22 AM DEATH Looks awesome on a vert - on a regular roofed 6GC ... Oct 18, 2008 - 10:17 AM njccmd2002 QUOTE (DEATH @ Oct 18, 2008 - 11:17 ... Oct 18, 2008 - 10:54 AM zero07 Nice job! I agree, they probably only look goo... Oct 18, 2008 - 11:06 AM njccmd2002 RE: How to Swap MR2 Seats into a celica Oct 18, 2008 - 2:06 PM Coomer Nice work! I love seeing projects like this. Oct 18, 2008 - 2:19 PM mrgrape nice!, can i see ur celica too ? Oct 20, 2008 - 9:15 PM njccmd2002 hahaha, fixed the links, and had to bump this thre... Jun 15, 2011 - 12:34 AM stephen_lee can i see your celica too?? lol Jul 7, 2011 - 3:02 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 17th, 2025 - 10:13 PM |