 Need starter motor info ASAP, Fixed - Thanks 6gc, D-Man, Griffgirl and Tweak! |
 Jul 23, 2008 - 5:38 PM
|
 
|
 Enthusiast  Joined Dec 19, '07 From tx Currently Offline Reputation: 22 (100%)  |
My starter winds up but doesn't sound like it's engaging the flywheel at all - no resistance - no start. It's been acting up recently like it stutter starts and I'm thinking it must be either the teeth are all gone now or it's not exsteding the way it's supposed to. I'm at work with no way to get to another starter. Anybody know any tricks etc?
Can our cars be push started? I know my old '86 could but I've been told the newer ones won't. Help! This post has been edited by DEATH: Jul 24, 2008 - 8:05 AM --------------------  ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI] PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYO SUSP: Tein/Bilstein/SusTech/ INT: SS-III SEATS/Toyota Hyper Sports EXT: WRC/TRD/404 QUOTE (lagos @ Aug 25, 2010 - 10:13 AM)  Its a safety feature so that people like you don't end up killing themselves or everyone around them. Slow down Paul Walker. 6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url] |
 |
Replies
|
Jul 23, 2008 - 6:02 PM
|
|
|
Enthusiast Joined Dec 19, '07 From tx Currently Offline Reputation: 22 (100%) |
OK - anybody have a manual or remember doing this recently? I got the starter off but the wire underneath is attched to the tranny somehow and I can't see it very well. Anybody got pics, drawings BGB help anything?
Thanks so much for the team help guys! BTW - Don't I remember testing one before by pulling it loose and bumping it manually to look for exstension? Do I have to ground it some other way cause my starter only has one wire from what I can see. BTW2 All the teeth seem intact on the starter but there is a bunch of shavings of some type where the gear goes into the tranny.  DUH! - I think [It's been a long time since I changed these starters] I just pulled the starter motor but not the whole thing right? It's not the two long bolts that go on either side of the starter but the two on the gearhousing below it right? Griffy! Pics please! This post has been edited by DEATH: Jul 24, 2008 - 8:40 AM -------------------- ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI] PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYO SUSP: Tein/Bilstein/SusTech/ INT: SS-III SEATS/Toyota Hyper Sports EXT: WRC/TRD/404 QUOTE (lagos @ Aug 25, 2010 - 10:13 AM) Its a safety feature so that people like you don't end up killing themselves or everyone around them. Slow down Paul Walker. 6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url] |
Posts in this topic
DEATH Need starter motor info ASAP Jul 23, 2008 - 5:38 PM
GriffGirl I think you can push start it.
However - just giv... Jul 23, 2008 - 5:40 PM Dr_Tweak Try hitting the starter with a hammer while cranki... Jul 23, 2008 - 5:48 PM
Havok1997GT QUOTE (Dr_Tweak @ Jul 23, 2008 - 6:4... Jul 23, 2008 - 5:50 PM GriffGirl I have PDFs for you with tons of info. Check your ... Jul 23, 2008 - 6:14 PM DEATH You rocketh. D-Man's on his way to take me to ... Jul 23, 2008 - 6:20 PM hurley97 the starters themselves don't normally go bad,... Jul 23, 2008 - 7:18 PM DEATH The BGB calls the gear housing that the starter sc... Jul 23, 2008 - 7:59 PM DEATH IT RUNS!!!!!!
Thanks D-man... Jul 23, 2008 - 8:18 PM D-Man QUOTE (DEATH @ Jul 23, 2008 - 7:59 P... Jul 24, 2008 - 9:03 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 4th, 2025 - 7:12 PM |