Intake Idea, I was bored... Options

[Nyczroflz]

So i was bored and i started thinking... I have a self-built SRI intake right now. It sucks in hot air and i kind of want it to suck in more cold... why not make a pipe that brings cold air from my front bumper to my sri. It would be a very ez mod and wouldnt cost much. Any thoughts/ ideas?

[monkey]

ohh take out the drivers side high beam and use the duct and pipe it over! that be sick!

[DEATH]

ohh take out the drivers side high beam and use the duct and pipe it over! that be sick!

Please don't - been done - much too ricey for our cars.

This has been done before many times. My last car had a chromed aluminum tube like you would use for an intake from the foglight to the hole where the stock pipe goes through [enlarged with the almighty dremil] and then it had a SRI in the shape of an S from the TB to the other pipe. Probably works better than a long snaky CAI [which looses velocity with all those bends that are necessary].
BTW - No need to move the battery if you wall off that one side of the bay just wall it off with the filter - you need not worry about the battery's temps effecting the intake air.
This is all pretty much a moot point as it won't do much, if anything, better than an SRI - Same as CAI. The biggest gain is just getting rid of the stock resonators and tiny piping, square paper filter box etc.

Manphibian - I was gonna post that - that's the nicest setup I've seen so far.

This post has been edited by DEATH: Jul 30, 2008 - 2:30 PM