Spray guns, And what to look for in them Options

[purplegt4]

I just want to know what people think about this starter kit.

http://www.spraygunworld.com/products/AdvanceTools/index.htm
other forums say these guns are basically disposable

what about this kit?
DEVILBISS FINISHLINE 3 HVLP 2 GUN BASECOAT/ CLEARCOAT AND PRIMER GUN COMBO KIT

What to look for in a gun would be helpful.

TIA


searched and got

To be honest 200.00 will get you a descent primer gun ... A all around good starter gun that is good for both base and clear are the devilbiss plus, devilbiss CVI(my favorite ), and the SATA RP.....
now I use a seperate gun for everything my line up is a SATA jet 90 for primer , a SATA RP digital for sealer a SATA NR2000 for Base(HVLP) and its awsome for metalics and pearls, and a DEVILBISS CVI for my clear, all with a 1.3 cap.... ALL Of those guns except the SATA NR2000 operate nicely at 40-45psi and the SATA NR2000 between 10PSI and 20 PSI The SATA's run between 500-700 and the devilbiss run between 4-500. Sometimes by looking at a pawn shop you can find them USED but just make sure the tips arent scared in any way and the fluid needles arent bent. I picked up my JET 90 that I use for primer for 30.00

This post has been edited by purplegt4: Jul 31, 2008 - 7:20 AM

[DiP203]

the painter at my shop uses the devilbiss finishline's for priming and paint, and a devilbiss somthing for clear all seem good not too many problems that i know of