6G Celicas Forums

Welcome Guest ( Log In | Register )

> ST205 Dash Cluster fit ST204 ??
post Aug 1, 2008 - 10:03 PM
+Quote Post
trdboy

Enthusiast
*
Joined Jul 31, '08
From Sydney, Australia
Currently Offline

Reputation: 2 (100%)




Just wondering if the dash cluster from a ST205 GT4 is a plug and play option for a ST204 Celica ?

I mean it is the same model car but just has the boost gauge and higher revs on the tacho plus 180km/h only.

Please advise as i wouldn't mind getting one and customizing it if it does fit as a plug and play option for a ST204.
 
Start new topic
Replies
post Aug 2, 2008 - 9:09 PM
+Quote Post
urbandork



Enthusiast
*****
Joined Jul 16, '04
From Los Angeles
Currently Offline

Reputation: 8 (100%)




you can make it work but you do have to reorganized the way the wires are fed in to the plug harness because while the plugs 204 plugs will plug into the cluster the wires will not be in the same position.

IIRC there are 3 different type of 205 culsters, an australian one, a jdm one and a euro one all three clusters run power/inputs differently so the pin outs are a bit different.

the best way to rewire the harness is to get a peice of paper mark out the pin outs on the 205 and 204 culster by following it from where the harness hooks up to the gauge culster to where it ends. then reconfigure the 204 harness to interface with the 205 cluster.

also keep in mind that the 205 culster will need an input from the PIM pin out on the ecu to feed the boost gauge this can be tapped into.

my head blah from being sick so if that dint make sence jsut let me knwo and ill to try to explain it again

hope this helps

This post has been edited by urbandork: Aug 2, 2008 - 9:15 PM

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: June 29th, 2025 - 9:08 AM