Aug 11, 2008 - 2:32 PM
|
|
|
Enthusiast ![]() Joined Feb 4, '08 From UK Currently Offline Reputation: 0 (0%) |
Hi guys, I recently installed some JDM tails and they look great. However I couldn't work out how to set up the rear fog lights.
My car is an import and im in the UK so rear fogs are a legal requirement - Im presuming here that the JDM tails don't have fog lights built into them? Cause i certainly can't see it! My next question is that the previous owner rigged up a switch on the dash to turn the rear fogs on, however with the new JDM lights when switched nothing happens to the rear but when I brake the front fogs flash (turn on) = weird!!!! Is this some suspect dodgy wiring job that Im going to have to investigate and redo? Or this a common problem? Any help would be great!!! Ta! -------------------- ![]() |
![]() |
Aug 11, 2008 - 3:00 PM
|
|
|
Enthusiast ![]() ![]() Joined Apr 22, '07 From Buckinghamshire, UK Currently Offline Reputation: 2 (100%) |
hey dude. Why don't you post on the UK forums....more likely to get help there.
Sounds like the rear fogs were wired to work concurrently with the fronts. You need to isolate the curcuits/ Have a look at the wiring under the steering column and inspect with a multimeter. I have the same tails and I just fitted an aux fog under the bumper. |
94TRDcelica JDM tails Aug 11, 2008 - 2:32 PM
frisp I cut the fog wiring and converted the offside rev... Aug 11, 2008 - 3:05 PM
stetsonaw are you using the wiring harness that came with th... Aug 11, 2008 - 3:50 PM
Driveby I rewired my inner stop lamps to be rear fogs, pre... Aug 12, 2008 - 1:34 AM
94TRDcelica Ah, that makes sense!!! I am using the... Aug 12, 2008 - 5:56 PM![]() ![]() |
| Lo-Fi Version | Time is now: February 12th, 2026 - 7:20 PM |