Aug 11, 2008 - 2:32 PM
|
|
|
Enthusiast ![]() Joined Feb 4, '08 From UK Currently Offline Reputation: 0 (0%) |
Hi guys, I recently installed some JDM tails and they look great. However I couldn't work out how to set up the rear fog lights.
My car is an import and im in the UK so rear fogs are a legal requirement - Im presuming here that the JDM tails don't have fog lights built into them? Cause i certainly can't see it! My next question is that the previous owner rigged up a switch on the dash to turn the rear fogs on, however with the new JDM lights when switched nothing happens to the rear but when I brake the front fogs flash (turn on) = weird!!!! Is this some suspect dodgy wiring job that Im going to have to investigate and redo? Or this a common problem? Any help would be great!!! Ta! -------------------- ![]() |
![]() |
Aug 11, 2008 - 3:50 PM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 3, '07 From Bellevue, Nebraska Currently Offline Reputation: 28 (100%) |
are you using the wiring harness that came with the JDM's? because the wiring harnesses are univeral... last i checked, so you should be able to use the one that works.
-------------------- ~Andy
![]() Check out my Droid Goodies | My Flickr |
94TRDcelica JDM tails Aug 11, 2008 - 2:32 PM
FunkySR hey dude. Why don't you post on the UK forums.... Aug 11, 2008 - 3:00 PM
frisp I cut the fog wiring and converted the offside rev... Aug 11, 2008 - 3:05 PM
Driveby I rewired my inner stop lamps to be rear fogs, pre... Aug 12, 2008 - 1:34 AM
94TRDcelica Ah, that makes sense!!! I am using the... Aug 12, 2008 - 5:56 PM![]() ![]() |
| Lo-Fi Version | Time is now: December 10th, 2025 - 3:17 PM |