Aug 11, 2008 - 6:38 PM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Apr 6, '08 From Overland Park Currently Offline Reputation: 9 (100%) |
So this weekend I tried tinting my tails, so I took the tails out, and put them back in, did this a couple times, didn't remove any bulbs or anything just took them out of the tails, well qhen I was doing this I eventually realized one of the lights was going out so I bought a new light for it and now my break lights won't work, on either side. . I only changed one bulb. . Size 1157. . When I turn on my headlights it looks as tho my tail lights are super bright like if the breaks were actuated but the center light on the hatch never lights up nor the break lights. . Idk what to do help please! I did accidently pinch one of the wires and broke it when I was screwing the tails back in but put the wires back together. . Idk what to do
Problem fixed.. Stupid fuses!!! thanks for the help tho! This post has been edited by bseaman_5: Aug 14, 2008 - 12:36 PM -------------------- ![]() |
GriffGirl Check your connections on that wire you put back t... Aug 11, 2008 - 6:49 PM
Culpable04 what is happening here is you have bridge the circ... Aug 11, 2008 - 6:58 PM
bseaman_5 Thanks for the tips I'll try both and post my ... Aug 11, 2008 - 7:10 PM
bseaman_5 I tried both of those ideas and neither of them fi... Aug 12, 2008 - 10:57 AM
Culpable04 check the bulb, is it a double contact or single c... Aug 12, 2008 - 11:42 AM
D-Man are the bulbs in the proper holes? Aug 12, 2008 - 11:47 AM
bseaman_5 Yes they are in the correct holes, if they weren... Aug 12, 2008 - 12:36 PM
bseaman_5 Well I finally got to look at my tail lights at ni... Aug 12, 2008 - 9:34 PM
bseaman_5 no other input on this??? Aug 14, 2008 - 1:15 AM
lubu Try and disconnect the pinched wire and see if the... Aug 14, 2008 - 1:35 AM
bseaman_5 I'll give that a try thanks. I'm going to ... Aug 14, 2008 - 1:37 AM![]() ![]() |
| Lo-Fi Version | Time is now: December 6th, 2025 - 7:49 AM |