MULTIPLE AMP WIRING, HELP!!! Options

[mikecelica]

I currently have a 600W 12" Phoenix Gold Sub in a single carpeted box, with a Sony 800W Amp connected to it. I just picked:
I have the 4 speaker system.

- Two 6.5" 200W Phoenix Gold Speakers for the front doors
- Two 5.25" 200W Phoenix Gold Speakers for the rear
- Two 150W Tweeters
- One 1.5 Farad Capacitator
- One 800W Power Akoustik 4 Channel Amp for the speakers

My question is how is all this supposed to be wired up? The tweeters I want to stick on the little triangle things on the doors. Im confused because I understand to get another power wire and another ground wire for the new amp. But the RCA wires and the memory wire, where does that go to, since my deck only has place for only one amp. How does the capacitator get connected? If someone can help me out with this by explaining or a diagram, I'd reealy appreciate it. thanks in advance.

This post has been edited by mikecelica: Aug 16, 2008 - 5:27 PM

[trdproven]

Capacitor is an option but basically this is how you wire it up. You can get a distributor block like mentioned. Make sure your primary wire is at least a 4 gauge. Or basically not smaller than your distributing power wires. You know what I mean, don't let a little wire feed two bigger wires. Other than that, you can run two power cables from your battery each with its own fuse. Ground wiring is a given find a good contact nut/bolt and secure it.