JDM Pwr Mirror Angles..., Having trouble with angles Options

[Betta-J]

Has any one had the JDM power folding mirrors and their angles are way off? My driver's side is at the furthest right and I can see most. My passenger's side is furthest left and I need it to go a little more.

Anyone know how to change the angle of the mount? or know they is happening when it was for this car in the first place? I did recieve the mount brackets when I purchased the mirrors, but did not use them since they were identicle.


Thanks

Newbie at forums,
Betta-J

This post has been edited by Betta-J: Aug 19, 2008 - 2:29 PM

[njccmd2002]

i opened up the toyota chaser relay that i got from ebay for 30 bucsk.

bloodystupidavey wrote some guides.. ill use that, i mean looking from inside i can pretty much tell who is ground and positive. then with my multimeter figure out if the others are same, if i burn it, well then, i cant use it anyways.

5 - Retractor reverse, left (RL) - BLUE-- to blue wire on Left Mirror
4 - Retractor limt sense forward, left (LFL) - YELLOW--to yellow on Left Mirror
(nipple)
3 - +B - BLUE/YELLOW-- +12V acc 'ON'
2 - Retractor limit sense reverse, right (LRR) - BLUE/RED-- blue/red on Right Mirror
1 - Retractor forward, right (FR) - RED/YELLOW-- red/yellow on Right Mirror
12 - Retractor reverse, right (RR) - BLUE/WHITE(white)-- blue/white on Right Mirror
11 - Retractor limit sense forward, right (LFR) - GREEN/YELLOW-- green/yellow on Right Mirror
10 - retractor switch (S) - PINK-- pink on switch
9 - GND - WHITE(white)/BLACK-- ground
8 - not connected (possibly auto retract function?)
7 - Retractor limit sense reverse, left (LRL) - BROWN-- brown on Left Mirror
6 - Retractor forward, left (FL) - GREEN-- green on Left Mirror