![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 17, '06 From New Jersey Currently Offline Reputation: 105 (100%) ![]() |
I have sourced an E58 LSD transmission, I have the axels sourced along with flywheel, starter, clutch. since is a E series transmission I'm assuming ST205 mounts should work , at least the rear, along with shifter cables. I know is not a popular transmission on the 6th gen but I'm sure some of you have valuable input on this. my biggest concern are the mounts compatibility, if you have any other ideas as far as mounts please post, I'll be getting a complete set of ST205 mounts and a AT200 manual tranny mounts and hopefully I'll get something to work and don't have to go cu$tom -------------------- ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 17, '06 From New Jersey Currently Offline Reputation: 105 (100%) ![]() |
is a popular swap on MK I MR2s but the MR2 supercharged USDM comes with an E51 so they use the stock USDM mounts.
Thanks for the offer on the ST205 mount, I'll contact you for my wiring and let you know if I'll need that mount, there are ST205 mounts already on the way but if there may be a problem I'll let you know and take you up on that offer. -------------------- ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: July 18th, 2025 - 10:16 PM |