Oversteer Options

[BonzaiCelica]

Well i just put in a new suspension set up on the car nothing to exensive since i didnt want like over a grand. But i have kyb gr2 struts with tanabe df210 dress up springs which dropped the car about 1.5 inches. Along with that i installed front and rear st sway bars. I still just have stock toyo spectrum not very good for turns. Anyays my question is when ever i take lane change really quickly,with a sudden jerk, my cars back end sways out a little and it not very convincing. if i were to go into a corner really fast it does the same to sways out a little. is this normal? If i were to get a rear strut bar would it blow out my rear kyb gr2 struts. Whats the cheapest brand of strut bars cause i know that c-one is expensive. Please help !! and Thank you

[BonzaiCelica]

Oh ok then. I now understand purpose of strut bar. So i always hear the rear suspension as if its reallly stiff probably cuase i have a hatchback. Is there more of a possibility that my rear might be stiffer than my front, and also is the more likely of a chance that my struts will blow cause i have stiff springs?? I have the newest ST sway bars the green ones. On the back when i was having them installed with the help of my friend, he said he put it on the stiffer setting which are the holes closest to the middle of the bar. so ur suggesting i put it on the 1st set of holes. Before i installed my suspension kit. I noticed understeer in the front when i turned sharp. How would understeer be applied to the back??? I plan on getting 16' enkei cdr9 with 205/50/16 falken fk452. Which should handle alot better. btw, what tire pressure should be used for tires like those??? Thanks for all the help.