 problems with 5sfe, help me plz |
 Sep 16, 2008 - 11:35 AM
|
 
|
 Enthusiast  Joined Feb 25, '03 From Springfield, MO Currently Offline Reputation: 1 (100%)  |
ok big story - engine started clicking after i replaced oil pump , i thought that it may have been the ole toyota tick in the lifters, just in case i checked my bearings on the crank-bad news i had atleast 2 spun bearings. SO sent the crank off to be checked-mains turned down .25mm and the rod journals polished. got it back and put everything back together and tq'd to specs. started it up and now the oil pump seems to be making almost a clicking sound and the head still has a tick sound and the idle was at 2000 at first, i checked my vac lines and started again and the idle is closer to 1200rpm so still not right but better...any suggestions?
new oil pump - machined crank with new bearings - new cap and rotor - rebuild trans - newish clutch - new timing belt -------------------- Coming in 2010 full paintjob - new wheels - modified body - new interior - engine build- marriage |
 |
Replies
|
Sep 17, 2008 - 10:52 AM
|
|
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
check your valve clearances
-------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
Posts in this topic
b1gr3d problems with 5sfe Sep 16, 2008 - 11:35 AM
b1gr3d i thought it would come to that Sep 17, 2008 - 11:58 AM nightryder did u prime the oil pump before you started it up? Sep 17, 2008 - 3:00 PM
b1gr3d yup Sep 19, 2008 - 6:38 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 22nd, 2025 - 8:50 AM |