Sep 17, 2008 - 8:55 PM
|
|
|
Enthusiast ![]() Joined Sep 15, '08 Currently Offline Reputation: 0 (0%) |
So, today I was messing around under my hood and noticed that the wire running to my oil pressure sensor plug was disconnected. I took the plug off the sensor and checked it out to see if the wire can be re-attached. Doesn't look like it. Anyone ever had to buy one of these? No one seems to carry the plug itself. I think Autozone and other places need to start carrying these things 'cuz as our cars get older, that plastic gets brittle.
|
![]() |
Sep 18, 2008 - 11:17 AM
|
|
|
Enthusiast ![]() ![]() Joined Sep 29, '05 From Rochester, Massachusetts Currently Offline Reputation: 2 (100%) |
or you can simply go to a salvage yard and pull that plug with about 6 inches of wire and pocket it. then you just splice it right in.
-------------------- ![]() The question is not how far. The question is, do you possess the constitution, the depth of faith, to go as far as is needed? |
Spitrod Oil Pressure Sensor Plug Sep 17, 2008 - 8:55 PM
bccentaur3 If you notice theres a tiny hole on the end of the... Sep 17, 2008 - 9:02 PM
Spitrod I'll try #1 and then #2 if to no avail. It... Sep 18, 2008 - 2:19 PM
Dr_Tweak I've got them here too, if #2 fails.
And don... Sep 18, 2008 - 3:12 PM
Spitrod I used a Dremel Tool to take out the left over wir... Sep 18, 2008 - 8:35 PM![]() ![]() |
| Lo-Fi Version | Time is now: February 26th, 2026 - 2:18 AM |