Sep 17, 2008 - 8:55 PM
|
|
|
Enthusiast ![]() Joined Sep 15, '08 Currently Offline Reputation: 0 (0%) |
So, today I was messing around under my hood and noticed that the wire running to my oil pressure sensor plug was disconnected. I took the plug off the sensor and checked it out to see if the wire can be re-attached. Doesn't look like it. Anyone ever had to buy one of these? No one seems to carry the plug itself. I think Autozone and other places need to start carrying these things 'cuz as our cars get older, that plastic gets brittle.
|
![]() |
Sep 18, 2008 - 3:12 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 31, '04 From Summerville, SC Currently Offline Reputation: 5 (100%) |
I've got them here too, if #2 fails.
And don't try #1, my .02. -Doc -------------------- -Dr Tweak, 6GC's resident engine swap wiring expert extraordinaire Click here to see my swaps drtweak@phoenixtuning.com |
Spitrod Oil Pressure Sensor Plug Sep 17, 2008 - 8:55 PM
bccentaur3 If you notice theres a tiny hole on the end of the... Sep 17, 2008 - 9:02 PM
nightryder or you can simply go to a salvage yard and pull th... Sep 18, 2008 - 11:17 AM
Spitrod I'll try #1 and then #2 if to no avail. It... Sep 18, 2008 - 2:19 PM
Spitrod I used a Dremel Tool to take out the left over wir... Sep 18, 2008 - 8:35 PM![]() ![]() |
| Lo-Fi Version | Time is now: January 16th, 2026 - 12:27 PM |