![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Mar 18, '08 From Staten Island, NY Currently Offline Reputation: 0 (0%) ![]() |
I'm looking to replace the underdrive pulley in my 1996 AT200. I have quite a massive sound system though, so I don't want anything that limits the power to my alternator. If anything, the same size as stock as long as it's lighter. Any ideas?
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Mar 28, '04 From St.Louis Currently Offline Reputation: 15 (100%) ![]() |
APC makes an underdrive pulley made out of CNC machined aluminum for the 7AFE motor. I have one on my car and it is MUCH lighter than the stock one...it took me a while to find the right belt sizes because their belt guide is incorrect, now if you do have a big I.C.E system then you are right you may not want to underdrive your alternator, unless you replace it with a more powerful one in order to make up for the loss.
BTW i think if you are looking for power and engine response increases, this mod is well worth it. Good luck with the decisions. -------------------- ![]() 1994 GT Hatchback 1994 ST Coupe 1988 Corolla Wagon All-Trac 1999 Corvette 2008 Cobalt SS Turbo |
![]() ![]() |
Lo-Fi Version | Time is now: September 24th, 2025 - 3:51 AM |